• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Antec 430 True Power question

I

icxnamjah

Limp Gawd
Joined
Aug 5, 2004
Messages
199
Hi, the booklet tells me to plug in (optional) the fan connecter on to the case fan so that the psu can control the speed of the fan.

My nivida card is going over 60 c and it worries me (this is idle - was 52 c idle when the exahust fans were pumping at full speed) because the exaust fans are not going as fast as they did when it was connected to the standard plug.

Also, the fan connector only had 2 pins while the case exaust fan has 4? Does this really work or should I go back to the regular plug? thanks all

p.s. the top of my case gets pretty warm - almost hot is this normal as well? (aluminum case)

p.p.s. if this question is nub I am one so bare with it and calm the flames =X
 
Id say go with which ever gives you the coolest case temps
but your case itself migh need more ventilation
it ideally would be the same temperature inside as out
 
You must log in or register to reply here.
Back
Top