Another Windows 11 Permission question?

[N Bates]

My transfer speed between my windows storage pool and NVME drive via an Intel network adaptorx540 t2 is between 800 & 900 mbs, the other way between 700 h 800 mbs.

Transfer between my OmniOS NAS also fitted with an x540 t2 to the windows 11 25h2 PC is between 10 & 11 mbs.

I have tried various smb share permission on the windows 11 pc to no avail as per below:
everyone set to read & change
Guest set to read & change
Administrator set to read, change & write
windows log in set to read, change & write

Any other suggestion?

Thank you.

 

[pendragon1]

check speed&duplex under the nics properties in device manager.

 

[N Bates]

check speed&duplex under the nics properties in device manager.

I have changed some of the settings under the adaptor on the windows side but not on the OmniOS side since I have updated OmniOS to r151054.

My adaptor settings on the OmniOS I recall were good, but not sure whether I loose these settings when updating the OS.

I remember changing the setting in napp-it.

 

[pendragon1]

i have no idea about omni, just know that you should make sure its on its max speed instead of auto.

 

[N Bates]

Stupid me! I had forgotten to revert my adaptor setting to what they were on my NAS, I was doing some testing to try and bind two adaptors.

Now reversed the settings to what they were and the transfer speed now is between 500 mbs and 650 mbs, happy with that.