• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

another CME question

M

moose517

Gawd
Joined
Feb 28, 2009
Messages
640
Hi guys, got a question for ya, found SCCP files for my 7940g phone and have it working now on the PSTN through my 2650xm. One thing that i need help with and my google results are failing me is with caller-id, when someone calls in it just shows unknown external call, How can i get CME to send the name and calling phone number? its probably something i have looked over but just didn't think it was it.
 
If you are using an FXO port for PSTN connectivity, ensure you have caller-id enable on the port, if not add it and then shut / no shut the voice-port

example:

voice-port 0/1/0
caller-id enable


Also, ensure that the telco has caller-id enabled on that line.
 
I'm not seeing the caller-id feature on the FXO card, only on the FXS card, the FXO card is in the left slot of the only module so it should be 1/1/0 right?
 
i have another question while i'm at it, the caller-id isn't working still but i have an additional question for you all. Is it possible to get both all the ip phones and phones on FXS ports to ring when there is an incoming call? right now i have the FXO port set with a plar of 1000 which is a line that will be common to all the phones. Is it possible to create a dial-peer that will make the phone on the FXS port get it as well, ive tried creating a dial-peer with a destination-pattern of 1000 but it never rang.

here is my current config on the router if that helps enyone out.

Code: 
Current configuration : 3234 bytes
!
! Last configuration change at 01:36:11 EDT Sun Aug 30 2009
! NVRAM config last updated at 21:21:31 EDT Sat Aug 29 2009
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2650XM_1
!
boot-start-marker
boot-end-marker
!
enable secret 5 XXXXXXXXXXXXXXXXXX
!
no aaa new-model
clock timezone EST -5
clock summer-time EDT recurring
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.135.1 10.10.135.20
!
ip dhcp pool VOICE
   network 10.10.135.0 255.255.255.0
   option 150 ip 10.10.135.1
   default-router 10.10.135.1
   dns-server 4.2.2.2
!
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
archive
 log config
  hidekeys
!
!
!
!
!
!
interface FastEthernet0/0
 description UPLINK TO S2950_1
 no ip address
 speed 100
 full-duplex
!
interface FastEthernet0/0.1
 encapsulation dot1Q 1 native
 ip address 10.10.137.1 255.255.255.0
!
interface FastEthernet0/0.10
 encapsulation dot1Q 10
 ip address 10.10.135.1 255.255.255.0
!
interface Serial0/0
 bandwidth 10000000
 ip address 10.10.134.2 255.255.255.0
 clock rate 8000000
!
router rip
 version 2
 network 10.0.0.0
!
ip forward-protocol nd
!
ip http server
no ip http secure-server
!
!
tftp-server flash:P00307020200.loads alias P00307020200.loads
tftp-server flash:P00307020200.bin alias P00307020200.bin
tftp-server flash:P00307020200.sbn alias P00307020200.sbn
tftp-server flash:P00307020200.sb2 alias P00307020200.sb2
!
control-plane
!
!
!
voice-port 1/0/0
 caller-id enable
!
voice-port 1/0/1
!
voice-port 1/1/0
 connection plar 1000
!
voice-port 1/1/1
!
!
!
!
!
dial-peer voice 90 pots
 description Service Dialing
 destination-pattern 9[469]11
 port 1/1/0
 forward-digits 3
!
dial-peer voice 91 pots
 description 10-digit dialing
 destination-pattern 9[2-9].........
 port 1/1/0
!
dial-peer voice 95 pots
 description 7-digit dialing
 destination-pattern 9[2-9]......
 port 1/1/0
!
dial-peer voice 92 pots
 destination-pattern 911
 no digit-strip
 port 1/1/0
!
dial-peer voice 1002 pots
 destination-pattern 1002
 port 1/0/0
!
dial-peer voice 1001 pots
 destination-pattern 1001
 port 1/0/0
!
!
!
!
telephony-service
 load 7960-7940 P00307020200
 max-ephones 10
 max-dn 48
 ip source-address 10.10.135.1 port 2000
 system message I didn't break it.
 max-conferences 4 gain -6
 transfer-system full-consult
 create cnf-files version-stamp 7960 Aug 28 2009 22:46:28
!
!
ephone-dn  1  dual-line
 number 1000
!
!
ephone-dn  2  dual-line
 number 1001
!
!
ephone-dn  10
 number 5555
 paging
!
!
ephone  1
 mac-address 0015.62EA.2F24
 paging-dn 10
 type 7940
 button  1:1 2:2
!
!
banner motd ^CC
*****************************

DO NOT ACCESS THIS ROUTER
VIOLATORS WILL BE PROSECUTED

*****************************^C
!
line con 0
 exec-timeout 0 0
 password XXXXXXXX
 logging synchronous
 login
line aux 0
 exec-timeout 0 0
 password XXXXXXXXX
 logging synchronous
 login
line vty 0 4
 exec-timeout 0 0
 password XXXXXXXX
 logging synchronous
 login
!
ntp clock-period 17208219
ntp server 10.10.136.150
!
end
 
I'm guessing you have a VIC-2FXO, you probably want a VIC2-2FXO.

"Caller ID Requires VIC-2FXO-M1, VIC-2FXO-M2, VIC-4FXO-M1, VIC2-2FXO, VIC2-4FXO, or MRP3-8FXOM1"
 
thanks for the info, can you use VIC 2 cards on the NM-2V carrier module or will i need a new module as well?

as for my other question, is it possible to have both my IP phones and phones on the FXS ports ring for an incoming call, i can only seem to get the IP phones to.
 
thank you much. i figured that was the case. I guess i'll just pick up a couple ata 186's for the analog phones in the house, the atas work just like the IP phones right, with buttons and ephone-dn's?
 
You must log in or register to reply here.
Back
Top