AMD CPU + DDR3 Memory Benchmarks Posted

Terry Olaes

I Used to be the [H] News Guy
2FA
Joined
Nov 27, 2006
Messages
4,646
TechPowerUp translated some posts from the Tom’s HW Taiwan site showing the first benchmarks of an AMD machine running DDR3 memory. The hardaware used in the benchmark session was a Gigabyte MA790FXT-UD5P motherboard, AMD Phenom II X4 910 AM3 CPU, and a Corsair dual-channel DDR3-1333 kit.

The CPU-Z window also shows that the memory modules are running unganged, meaning that the two memory controllers of the Deneb core are independent, with each controller handling a 64-bit wide memory channel. This state is somewhat comparable to that of single-channel memory, except that multi-threaded applications will still be able to independently address memory on each channel, utilizing all the bandwidth on offer.
 
I might be misunderstanding what they are trying to state in that quote but the whole ganged/unganged mode has nothing to do with AM3's two memory controllers.
 
i shall wait for a real down to earth comparison its no killer i7 though it was never ment to be.

i digress though with the next generation amd server processors going quad channel memory with 4 ht 3x links on 6 - 12 cores, things could get very interesting if such things see the light of day
 
Ouch, doesn't look like DDR3 is going to save Deneb either.

The Shanghai server chips will get a boost from the switch to DDR3 in bandwidth limited loads.
 
I might be misunderstanding what they are trying to state in that quote but the whole ganged/unganged mode has nothing to do with AM3's two memory controllers.

u are.

ganged mode is 1x128bit dual channel

unganged is 2x64 bit dual channel

in unganged the memory controllers act indendent of eachother.

 
Nice, Everything is Gigabyte except the cpu, lol

I use a very similar HSF for the cpu (just different color fan setup) from Gigabyte, it runs great on my S939 x2 setup, low 30's idle, high 40's load. Dunno how it would run on a Quad Core though.

Maybe that would mean I can re-use my HSF for AM3 setup ;)
 
Any idea how much that GA-MA790FXT-UD5P motherboard is going to cost? I looked up the specs on Gigabyte's site and it looks pretty badass. If I can give one compliment to AMD, their enthusiast motherboards are typically very price friendly, usually costing a bit less then their Intel counterparts.

If that board is priced right, I may jump to AM3 just to get it.
 
9-9-9-24 @ 1333 ??? c'mon they can find better ddr3 than that to test with. will it help, i don't know but use the real stuff at least, yeesh.
 
Yea I have to say Gigabyte in general's enthusiast motherboards ARE Badass. I'm not an Intel guy, but do any of their boards have the "Ultra durable" type features etc....?

Sorry for off-topic
 
Yea I have to say Gigabyte in general's enthusiast motherboards ARE Badass. I'm not an Intel guy, but do any of their boards have the "Ultra durable" type features etc....?

Sorry for off-topic

Yeah, there are quite a few "Ultra Durable" Intel boards (including the new UD versions). Any Gigabyte AMD board you see has an Intel equivalent. Its just that, usually, the AMD versions are slightly cheaper.
 
Why has no one else picked up on this?

I cannot honestly remember the last time in 10 years when TH or Tom Pabst was mentioned on the site. Is the beef over? I remember people getting in trouble for mentioning or linking to his site?

Was there a memo I missed?
 
Back
Top