Am I missing something obvious? A8N SLi Premium

Kil4Thril

2[H]4U
Joined
Sep 21, 2003
Messages
2,974
A8N SLi Premium
Opteron 144 (stable on DFI at 2700 for last year)
OCZ Platinum 2-3-2-5

I've had it 12 hour Primed at 285x9, memory on 266 divider, and everything sweet. Temps never reach over 40, and my rails are spot on (measured with DMM). I cannot re-boot. The voice will come on and say failure due to CPU OC'ing. If I keep hitting the reset switch and finally get through the POST, it will run and Prime again. How can I get a consistent POST- and how can I get it back to 300x9?

I know I left out a bunch of stuff, I'm just unsure as to what is relevant.
 
This was an issue with earlier BIOS's...

What revision are you running?

PS: didn't the voice scare the hell out of you the first time you heard it :D
 
Arcygenical said:
This was an issue with earlier BIOS's...

What revision are you running?

PS: didn't the voice scare the hell out of you the first time you heard it :D

I just updated to 1302 and I'm Priming at 280. I'll go higher in a couple of hours.

Yes, I actually screamed aloud when the voice went off. My DFI and eVGA boards certainly don't yell at you when you fuck up.
 
Kil4Thril said:
I just updated to 1302 and I'm Priming at 280. I'll go higher in a couple of hours.

Yes, I actually screamed aloud when the voice went off. My DFI and eVGA boards certainly don't yell at you when you fuck up.

Me too. It was at about 4am, and my speakers were MAX (I was listening for a boot beep code). Goddammit ASUS. Like, really. If you're going to use a boot beep:

DONT SCREAM SHIT AT ME!
 
Arcygenical said:
Me too. It was at about 4am, and my speakers were MAX (I was listening for a boot beep code). Goddammit ASUS. Like, really. If you're going to use a boot beep:

DONT SCREAM SHIT AT ME!


ROFL samething happened to me it scared the jubus outta me. SYSTEM MEMORY FAILURE!!!!. OMG I never thought that there would be a voice. Good Times. haha
 
My wife heard the voice AND me yell at its startling of me. Of course SHE thought it was funny. SHe came to see if Far Cry was kicking my ass (she's heard me curse several games in our years together) :p

On the original topic:

300x9 has been Priming for about 3 hours now. If it goes until I get out of bed Sunday afternoon, I'm going for 3Ghz. I see no reason not to. My temps under full load is still only 40C (on a single BIP/Apogee). This is starting to be fun since I can OC this board without wondering if it will ever boot again (coming from a DFI SLi-DR).
 
So the bios update seemed to help?

I was only able to get my board to 266 x 10 before it crapped out on me... My first (2) A8N-SLI's got to 285 before the CPU crapped out... Sigh.

I see a 305-315 FSB in your future, but not much more than that... these things dont normally go over 300!
 
Well, 300x9 Primed for almost 16 hours. I forgot to stop it before bed this morning (NyQuil will do that to you). So, it's at least Prime stable. I'll play with it more later.
 
Back
Top