Am I doing this right? With Pix!

Joined
Mar 13, 2008
Messages
54
Hey all,

Just need some quick confirmation. I'm setting up a striped RAID (mostly as an experiment), and I'm finding it rather strange that I'm unable to boot into Windows 7 with 'RAID' selected as the SATA mode in the bios - I HAVE to pick AHCI:

imag0068p.jpg


Here's the course of events (as best I can recall, please see screenshot below) -

1) Installed SSD (Disc 0 in screenshot) and storage drive (Disc 2 in screenshot)
2) Changed to AHCI SATA mode in bios
3) Formatted, put Windows 7 on SSD
4) Formatted Disc 2, 500gigs storage, 500gigs Truecrypt volume (work)
5) Installed Samsung F3's
6) Changed to RAID SATA mode in bios
7) Setup RAID

Windows wouldn't boot (gets to the loading screen and then crashes), so I switched BACK to AHCI in bios

8) Entered Windows, installed Intel Matrix Storage Manager
9) ... got worried I'm missing something.

I guess I always assumed RAID SATA mode really meant (AHCI + RAID) SATA mode, so it's kind of bothering me that I can't boot Windows 7 without AHCI explicitly selected.

Is Windows recognizing the RAID 0 volume? It seems to show up in the disk management software included in the OS (Disk 1).

dskmngr.jpg


Thanks bunches in advance.

-HD
 
you have to partition & format the two 1Gb drives with Raid mode enabled for striped (RAID 0) or mirrored (RAID 1).

Thought with mirrored you can add the 2nd drive later like you're trying to, after the first drive was formated as a RAID drive.

With striped both drives must be installed and formatted as one drive together.

Google be yo friend.
 
1) Installed SSD (Disc 0 in screenshot) and storage drive (Disc 2 in screenshot)
2) Changed to AHCI SATA mode in bios
3) Formatted, put Windows 7 on SSD

You installed in AHCI mode, so Windows is using the AHCI drivers to boot. You need to install in RAID mode (and possibly supply RAID drivers during setup) so that Windows will recognize the controller when it boots up. The easiest way to fix this is to reinstall, but you can also do some trickery to install the RAID drivers and switch the Windows boot settings in the registry to get it working.

Also note that TRIM (if supported by your drive) won't currently work in this setup, because you'll be using the RAID drivers which don't pass the TRIM command from the OS to the SSD. It appears you have two controllers (Intel ICH and JMicron?), so you could avoid this by putting the SSD on one controller and the RAID array on the other. You could then use the default drivers (which support TRIM) for the controller with the SSD, and use the RAID drivers on the controller with the RAID array.

Hopefully Intel will release updated controller drivers soon, which may allow you to have TRIM on your SSD in RAID mode, possibly even on an array of SSDs.
 
I think I got this to work somehow -

1) Switched SATA mode to RAID (meaning I couldn't boot Windows)
2) I set up the RAID via Cntrl + I
3) Switched BACK to AHCI (so I could get into Windows, and have TRIM)

Windows recognized the array even though AHCI was selected in bios and not RAID. Which I wasn't expecting. BUT, I formatted fine, it's being treated as a single volume, and it's smokin' fast. So I'm happy.

It's just strange that Windows sees a raid array fine with AHCI selected, but can't boot with AHCI drivers when RAID is selected.



Thanks guys.

-HD
 
Yeah I set up my RAID that way first.

The problem with that method is that you can't run Intel Matrix Storage Manager. ie: run diagnostics, see the status of the array, etc.

But the drives are in RAID mode via the BIOS.
 
Back
Top