All the ABIT's users, please get in...

Joined
Jun 19, 2004
Messages
62
Ok, I heard that the ABits mobos are showing the temps lot higher that they really are.
i want to check it, so every user please write your rig + which cooling+ which thermal greas...
(Only the abit users)..
My :
2.4C + Vantec Aeroflow + Arctic Silver 3.
ABIT IC-7
Mushkin Black lvl 1 512 X2
Hercules 9700Pro
WD 800JB

temps:

CPU
IDLE - 47-50 (very hot !)
LOAD - 60 (+-)

Mobo:
IDLE - 33
LOAD - 36-37

Thank you all!
 
AXP 2200+ in my sig:

MBM5

IDLE:

Case - 27c

CPU (socket NOT diode) - 40c

LOAD:

Case - 29c

CPU (socket NOT diode) - 47c


This is with no O'C, but even still, i'd have to say it's under-reporting if anyting.

EDIT: Well, I can't see my sig, if you can't either, the board is an NF7, all stock except for AS5.

EDIT#2: helps to turn sig on, meh.
 
Specs in sig:

Hot room, no AC :(

CPU Idle: 41°c

CPU Load: 47°c

Load temp is 2°c lower with Shin-Etsu than with Artic Silver 3 :D


OldMX
 
Thank you all!


OldMX said:
Specs in sig:

Hot room, no AC :(

CPU Idle: 41°c

CPU Load: 47°c

Load temp is 2°c lower with Shin-Etsu than with Artic Silver 3 :D


OldMX

I cant see your rig.... so please write your cpu and mobo...



any other users?? please write your rigs and temps...
thanks! :D
 
Its a known issue, they used some shitty winbond chips for a few billion mobo's and have been claiming forever a bios flash will fix it, every new bios claims to fix it and none of them ever do.
 
Ok , will wait... ;)

BTW if my Vantec aeroflow shows 45-48 in IDLE so its asy i have something like 36-38??
 
NF7-S and a 2500+@3200+ undervolted to 1.6V. I use the stock AMC heatsink/fan with the copper core. I am using Arctic Silver 5.

CPU: 38C Idle and ~44C Load
Case: 27 Idle and ~30 Load
 
system in sig

Heatsink is thermalright slk 947-u with a 92mm tornado and arctic silver 5

mbm5 says idle is 37C load is 40C

sink5.JPG
 
2.8c - ABIT IC7
Stock hsf - Arctic Silver 5
Temps:45 C idle
~58 C load

Case is around 36 C.
i'm ready for watercooling... soon.
 
2500+ barton (2.1GHz)+as3+thermalright slk 700 54mm fan
nf7 rev2
9800 pro
2hdd/dvd-rw/cd-rw

cpu:
idle - 48c
load - 59-60c

case: 34c
load: dont care

i think i need to reaply some as3....but im going water real soon
 
Yeah, I doubt it will ever be fixed. Bunch of BS if you ask me...and it's kinda sad because their boards are always great in every other aspect (at least the models over the past 3+ years).

IC7-G MAXII
2.4 @ 3.3GHz - 1.6v
Zalman CNPS7000Cu @ 1200RPM (Speedfan)

Idle: 43
Load: 57

It's probably really in the mid to low 30's at idle and mid to upper 40's under load. I had this same chip in an modded Shuttle SB61...it idled about 32 and maybe saw 50C once under load.

ABIT - If you read this, fix it, or at least figure out the delta and compensate for it. PLEASE! :mad:


Tom
 
Specs in sig-

Typically- 39 idle, 45 load in barely air conditioned room

In air conditioning- 33 idle, 39 load
 
Well its 71F in my room right now.

Case is an Antec 1080AMG (second system in my sig). 2 80mm Panaflo H fans drawing air in from the front (behind the air filter). One blows over my 2 hard drives, 1 crappy antec fan exhausting out the side of the case and two TT Smart Case Fan 2s as exhaust in the rear.

CPU has an SP-94 with a 92mm Panaflo M fan blowing on it using AS-5.
NB has a Thermaright NB-1 cooler with AS-5 (I need to 7volt that fan).

System temp is 26C
CPU is 34.5 idle. Gets up to around 42 under load, but since supposedly the Abit over-reporting isn't linear I suspect that while the idle may be 2 or 3 degrees high, the load is probably closer to 5.
PWM is 28.5
 
emorphien said
"Case is an Antec 1080AMG (second system in my sig). 2 80mm Panaflo H fans drawing air in from the front (behind the air filter). One blows over my 2 hard drives, 1 crappy antec fan exhausting out the side of the case and two TT Smart Case Fan 2s as exhaust in the rear."

On my 1080 the side fan draws in[came that way from Antec] as do the two front fans.
The rear 2 fans exhaust.All Antec[crappy?] 80mm red led fans except the side one has no led.
Stock hsf and shitty Intel thermal thing.
2.8c@3.1ghz
Room temp 68[a/c]
idle
sys 26c
cpu 37c
pwm 32c

Cranked[Painkiller]
30/44/38
Prime
32/53/38
 
Antec fans aren't really great for airflow, but at least they are quiet.
 
I am starting to think that i am the only one who gets something like 60 C in load and i have vabtec aeroflow +as3!! why?!
 
The Unknown said:
I am starting to think that i am the only one who gets something like 60 C in load and i have vabtec aeroflow +as3!! why?!

ur not alone, i used to get 60c in load 2 (had my pc in my desk tho). when i reappy some as3, itll go down hopefully
 
Celeron 1.2, stock heatsink and fan from boxed processor.
ST6-RAID
I have the left side of the case removed.
Ambient temperatue: 22C

CPU:
Idle: 40C
Load: 42-43C

Motherboard:
Idle: 39C
Load: 40C

I'm running the CPU at stock 1.2; there's very little temperature difference between idle and load temps, a few degrees at most.
 
I have just bought the Abit IC7 Max3
the processor is P4 2.4C running stock and temperature is 45.5C (while i am doing nothing, meaning idle)

the heatsink is the stock that came with my bro's 3.4ghz P4
which has a copper core

I thought it will give me lower temperatures, is well seated, i havent look for load temperatures since i dont know how to read them under load (i knew it how to do it with the asus motherboard since the utility had a temperature record feature)

anyone know how? :confused:

by the way the grease is AS5
 
Aztlan said:
by the way the grease is AS5
Thats a funny question actually. I never really thought about it, I just drag the hardware monitor over to my second monitor when I want to watch it while playing a game. Haha. I have no idea.
 
Abit IC7-G, 3.0 @ 3.6 @ 1.6V, Shin, Zalman 7000alcu
CPU: 47c idle, 63c load (2 instances of pifast43), room temp 78F
Case: 36C idle, 37c load

Temp probe at base of heatsink right next to processor reports 43C.
 
I really dont know what do do!
or to buy the ZalmanCNPS7000CU or the AL-CU
or
Thrmalright SP94+SF2.
What do you think??
 
NF7-S Rev 2.0
AMD XP-M 2500+ @ 2.2Ghz (11x200) 1.60v
Idle: 45C load: 53C
 
2.6C on a Max3 @ 3318 @ 1.6V Vcore (1.55-1.58Vcore realistically)

ambient temp: 20.5C
PWM: 26C load 32C
Case: 25C load 25C
cpu: 39C idle load 54C

max temp so far has been 57C on the cpu under ambient temps in the room hovering around 29C.

All this with an SLK-900U and tornado @ 2600RPM.
 
The Unknown said:
Nice Temps!

So if mt ABit IC-7 showing 48C its 38-39 C (In a real probe)??
The only probe that counts generally is the one in the core. You can put a thermal probe next to it when you mount a heatsink but that can't be trusted to really give you any reliable information. unfortunately Abit over-reports the core temp so that's a bit irritating too. Damned if you do, damned if you don't.
 
Abit IS7 with P4 2.6c running at 2.8
Swifttech MCX478 Heatsink with 92mm Vantech Stealth fan running at 1700rpm
Lian Li PC60 case, all fans case fans running at "half speed" on the dials for fan controller.
Artic Silver 5

Idle Temps: Case 36c CPU 37c
Load Temps Case: 42c CPU 50c After running CPU Burn-in for 1hr

After loading latest BIOS for IS7 I noticed about a 5 degree drop, but that could have just been from my Thermal Paste having more time to settle.

Room temperature was around 80F, but started lower, I closed the AC vent in the room at the test time.

If I crank all the fans up I can get about a 3-4 degree drop in case temp, and 1 or 2 for CPU.
 
Abit IC7 w/ P4 3.2C@3.84Ghz. Cooled with a VOlcano 7+ and AS3. My case cooling consists of 4 Delta 80CFM 80mm fans.

No matter what speed I run my CPU, it says 53C ALL the time. Whether it is Idle or Full Load.
 
Hopefully I'm remembering all this correctly, but...

The actual probe that the motherboard reports for the CPU on Abit, Asus and most motherboards is in the CPU die. Abit doesn't put the probe there, Intel does. Abit just reads the voltages from the probe and calculates the temp, which they don't exactly do correctly.
 
The Unknown said:
Ok...
its the probe who dont behave well no?

I wouldn't behave well if I were "probed" either... :eek: My IC-7 and 2.4C (@3.1 w/ Zalman 7000Cu) reports 55-60 degrees C, even though I doubt it really is.

-SEAL
 
Ok.... check your real temps with a real probe of yours...
i am sure that your temps much lower!
BTW, update your bios it just might help.
 
Afro_Thunder said:
I wouldn't behave well if I were "probed" either... :eek: My IC-7 and 2.4C (@3.1 w/ Zalman 7000Cu) reports 55-60 degrees C, even though I doubt it really is.

-SEAL
It's probably fairly close, you might want to check for good contact and maybe reapply thermal goop (use AS5). The abit does overreport but there's a limit to how off it goes. You may be within 5 or 7 degrees of what your motherboard is reporting.
 
Back
Top