Alignment issues (Win7 SSD install, image and restore to SSD)?

Psychor

Limp Gawd
Joined
Dec 22, 2007
Messages
388
Let's say I create a RAID 0 array of fresh 80GB G2s. I create a single partition which is 85% of the max drive space and then install Win7 to the array. I then image the install (via DiskSnapshot), wipe the G2s via a secure erase, re-create the RAID array and create the same partition disclosed above. Would I have a problem, alignment wise, restoring (via DiskSnapshot) the Win7 image to the wiped G2s?


Thanks.
 
Some imaging software will break alignment and some will not. Many will only break alignment if you select certain options during the backup or restore process. For example, my Ghost 12.0 will break the alignment on the restore if I click the checkbox that states "restore disk signature". As long as I leave that checkbox unchecked, I keep my alignment. It breaks it regardless of whether the alignment was correct during the backup or not.

That being said, you can either hope and pray that someone else here has an in depth understanding of SSD alignment and DiskSnapshot or you can test it out yourself.

If you decide to test it out yourself, I've provided a few methods/tools of checking your alignment. Be sure to read through the second post on either thread.
http://forums.techpowerup.com/showthread.php?t=107126
http://www.ocztechnologyforum.com/forum/showthread.php?t=57599

Good Luck.

Jason
 
Back
Top