Alarm!! AH~~~~

x y u

Limp Gawd
Joined
Sep 21, 2000
Messages
294
So i get a new case (with more room to work with) and a bit modded w/ lights and stuff. Nothing big. Well i remove everything from my old case and put it in this new case.

I turn it on and the suddenly......BEEE OOOOOO BEEEE OOOOO......

the damn alarm just keeps ringing. I'm not sure what's going on. It won't post or anything. I hit the power button, lights come on, fans turn on, cpu fan ok, CD LEDs come on, Monitor light does not go out of standby, and no post.

Things i've tried:

I've reseeded all my cards / vid card / ram etc...
I've unplugged the power supply, took out my cmos jumper, and took out the mobo battery for approx 35 seconds, put'm back in and still getting the alarm.

I have an old abit IT7 MAX, 512mb crucial pc 3200 ram, Geforece4 TI 4200, Windows xp prof. (not that i can get to it) I havef a wireless network card plugged in, and a USB card connected to jumpers on the mobo, also soundblaster live! Cpu is intel 2.4ghz B

I've searched the boards and have come up w/ no other solutions. Please help!!
 
check standoffs. Just a guess cause you moved to a new case. The bee ooo bee ooo alarm happened to me when my proc fried.
 
That's the worst when that loud a$$ noise starts howling. Might check and make sure you're properly grounded. Maybe make sure your HSF is on the processor nice and snug. Other than that, no sure. Might have a toasty proc. :(

Unless of course your talking about my motherboard (AV8), that's normal for those hunks of poo. :rolleyes:
 
tell me if this would matter, someone mentioned standoffs...

the screws for my standoff are too big so they only screw in half way and not all the way to the motherboard. so there's a small gap between the atx case screws and the motherboard.

does that make sense? would this cause it?
 
i thought the powersupply had to deal with grounding though. not the screws or standoffs. I'm going to try to get some proper screws for the stand offs. they don't take standard screws, i guess they take hard drive screws. I'll have to pick some up.

Any info about this possibly causing the alarm to go off?
 
most times standoffs take fine thread screws, the case or mobo shoudl have come with some. The most common problem with standoffs is one to many, I've seen a guy fry 3 mobos cause he put 1 too many standoffs in each time.
Like someone else mentioned a DOA proc is a good thing to check. Also check your mobo manual for alarm codes, it should mention what this alarm actually means.
If you want to check if it's the processor, pull it and try starting up again and see if the same alarm is given.
 
Just to close this thread, i found the solution.

I took off my HSF and reseeded the proc. Looks like that worked for anyone else with this problem.
 
Back
Top