Air cooling question - Coolermaster ATC-210 case

Daggah

2[H]4U
Joined
Mar 26, 2005
Messages
3,197
Okay, so my CoolerMaster case *finally* arrived from ebay last week...I've been thinking about the system I'm going to build in it. I plan on using it as a secondary machine (linux general useage/windows video encoding), so it's not going to be state of the art or anything. What I'm worried about are temperatures, since the case does not have any intake fans. I did buy the blue tinted coolermaster window. I also have a fan ducting kit that I was considering using to provide fresh air straight to the CPU HSF from the top fan (of course, flipping the fan around so it's an intake instead of an exhaust.)

Here's the thing - those windowed side panels are fairly expensive (for what they are) and shipping them to APO is a pain - it takes a week or more and there's always the possibility of damage. So I don't really want to cut a fan intake hole for it - I'm horrible at working on acrylic and what-not.

So my question is, would a AMD 64 2800+ with a GeForce 5200 (remember, not going for gaming, hence the old card) run too hot at stock speeds in a Coolermaster case that doesn't have any intake fans? I'm fairly confident it would be okay for the general linux use, but I am worried about the CPU being at full load for extended periods of time in this situation.
 
i had the exact same case (ATC-210). what i did was enlarge the top blowhole to 120mm and cut x2 80mm blowholes in the back. the blowhole up top was used as an exhaust and the x2 holes on the back are intakes.

What i would do is use the back 80mm fan as an INTAKE, and the top blowhole as an exhaust.
 
Back
Top