AHCI on new Windows 7 Install

Mav451

Supreme [H]ardness
2FA
Joined
Jul 23, 2004
Messages
4,749
I'm gonna be making a clean Win7 install on a new hard drive. I have several other HDs as storage (just files, no OS). Mobo is same as sig, Gigabyte P55-UD3R.

1) I understand Win7 should have some innate AHCI drivers during the install - do I still need to prep a USB drive with Intel RST drivers just in-case?

2) I have a SATA Port0-3 native Mode setting in BIOS. It's currently on "Enabled" I believe. Do I need to change this if I'm going from IDE to AHCI?

3) This site, http://expertester.wordpress.com/2008/07/24/ahci-vs-ide-–-benchmark-advantage/ says I should set the BIOS setting to RAID, not just AHCI. Is there any reason I need to do this? I don't plan on using RAID, ever.
 
1.)Windows 7 has built in AHCI drivers so no need to install them off a thumbdrive.
2.)Not 100% sure on this, but you would think that native mode means no IDE emulation.
3.)If you're not going to ever use RAID, there's no need to set your BIOS option as that.
 
Manual says it's between legacy IDE Mode and "Native" IDE mode for SATA. It's like...well Ii'm doing neither? Haha I dunno.
 
I always set the controllers to AHCI for our testing.
 
In your BIOS under Integrated peripherals, besides having a "SATA port(0-3 Native mode (Intel p55 chipset)" setting, which should be enabled, there's also a "SATA RAID/AHCI Mode (Intel p55 chipset)" setting; this should be set to AHCI
 
You want to refer to your manual on the port layout, if it is like my UD5 then you have two or three controllers for all the internal SATA ports. I agree, just set SATA to AHCI (on all controllers if you don't care about RAID) and personally I like to use the ICHxx for the boot drive.
 
Yes, set the SATA port to AHCI, then you will able to enjoy SATA2 features such as: hot-swap, NCQ and aggregating protocol

DATOptic Support
 
Yes, set the SATA port to AHCI, then you will able to enjoy SATA2 features such as: hot-swap, NCQ and aggregating protocol

DATOptic Support

In most cases, you *should* be able to use AHCI with Vista and later with *any* controller that supports SATA (onboard or card-based), as even the ICH5R (AKA ICH5SR) supports AHCI (with or without RAID) as these OSes included both SATA *and* AHCI from the beginning. XP, on the other hand, only supported SATA with Intel's ICH5R/SR at launch, and didn't add AHCI support until MCE and SP2 (my first AHCI testing involved the ASUS P4C800E Deluxe, MCE, and the Maxtor DiamondMax 200 GB SATA drive). I have my WD5000AVS in AHCI mode on 7 Ultimate x64 (started that way, actually) without a hitch.
 
In most cases, you *should* be able to use AHCI with Vista and later with *any* controller that supports SATA (onboard or card-based), as even the ICH5R (AKA ICH5SR) supports AHCI (with or without RAID) as these OSes included both SATA *and* AHCI from the beginning. XP, on the other hand, only supported SATA with Intel's ICH5R/SR at launch, and didn't add AHCI support until MCE and SP2 (my first AHCI testing involved the ASUS P4C800E Deluxe, MCE, and the Maxtor DiamondMax 200 GB SATA drive). I have my WD5000AVS in AHCI mode on 7 Ultimate x64 (started that way, actually) without a hitch.

Actually, with the ICH5R/ICH5SR, you cannot set AHCI independently of RAID. It's either both or none -- which means that if you disable RAID, you also disable AHCI. (I went by the settings on my old Intel D865PERLL mobo with its most recent BIOS version for this: The SATA and IDE combination modes are RAID or IDE only, with no separate AHCI setting.) Later Intel ICH's with RAID and/or AHCI support allows you to set AHCI without enabling RAID.
 
Last edited:
Actually, with the ICH5R/ICH5SR, you cannot set AHCI independently of RAID. It's either both or none -- which means that if you disable RAID, you also disable AHCI. (I went by the settings on my old Intel D865PERLL mobo with its most recent BIOS version for this: The SATA and IDE combination modes are RAID or IDE only, with no separate AHCI setting.) Later Intel ICH's with RAID and/or AHCI support allows you to set AHCI without enabling RAID.

I never ran RAID on my P4C800E Deluxe. AHCI, yes; but never RAID.

SATA RAID may have required AHCI; however, the reverse was certainly never true.

Also, you had the 865PE; the 800E Deluxe had a different *northbridge* - the 875P (Canterwood).
 
I never ran RAID on my P4C800E Deluxe. AHCI, yes; but never RAID.

SATA RAID may have required AHCI; however, the reverse was certainly never true.

Also, you had the 865PE; the 800E Deluxe had a different *northbridge* - the 875P (Canterwood).

You are correct on the 865PE. Intel offered the D865PERL both with and without RAID support - and the basic ICH5 (without the R) supported neither RAID nor AHCI. Unfortunately, Intel also decided to go cheap with that mobo's BIOS.
 
Back
Top