agp latency

ryuji

2[H]4U
Joined
Jun 11, 2004
Messages
3,115
what it do,posted in vid cards nobody responded so im trying here
 
number of clock cycles held by bus when transferring

256 is max

nvidia defaulted in card bios to 248 which is what caused conflict with Soundblaster cards. It held the bus too long so other heavy stream cards coudn't transfer. In Powrstrip you could alter the setting if you knew the cards IEEE ID and bus address (0h). 80-96 seems good. But this has all changed with new cards and mobo/chipsets/bios. I think the bus can handle pipeline clutter better. I dont worry about it anymore. If you can set it, the lowest that works is best, especially if you are doing video editing.

this is from the old days
http://www.overclockers.com/articles529/
 
cisco guy said:
number of clock cycles held by bus when transferring

256 is max

nvidia defaulted in card bios to 248 which is what caused conflict with Soundblaster cards. It held the bus too long so other heavy stream cards coudn't transfer. In Powrstrip you could alter the setting if you knew the cards IEEE ID and bus address (0h). 80-96 seems good. But this has all changed with new cards and mobo/chipsets/bios. I think the bus can handle pipeline clutter better. I dont worry about it anymore. If you can set it, the lowest that works is best, especially if you are doing video editing.

this is from the old days
http://www.overclockers.com/articles529/
so 32 is good? thats the default(agp latency is somthing new in new bios)
 
Yes, only increase it if you having VIDEO stability issues.

32 is default in the DFI Infinity/Lanparty BIOS's.
 
Back
Top