After resizing partition using acronis, drive is not formatted.

smidley

Weaksauce
Joined
Mar 3, 2010
Messages
114
I've got a server that hosts files (mostly video). It had 8x 2TB drives in it, and I just added two more 2TB drives bringing me up to 10. After reconfiguring the RAID array, I went to expand the drive size using the server 2008 R2 manager. I was told that the drive couldn't be expanded because of my cluster size. After doing some research online, I was told that I need to use a 3rd party program to get this done.

Loaded up Acronis and chose the resize option. Told it to use the maximum size and it said that it would need to reboot. I went ahead with it and it said it was successful. Got back into windows, look in my computer, double click on the drive, and windows states that it needs to be formatted first. Starting to get a sick feeling in my stomach.

I fire back up acronis and the drive shows up fine, and when I use the file browse mode, I can see my files still on the drive. What do I need to do in order for this drive to be usable in windows again. I can't loose this data.
 
I've got a server that hosts files (mostly video). It had 8x 2TB drives in it, and I just added two more 2TB drives bringing me up to 10. After reconfiguring the RAID array, I went to expand the drive size using the server 2008 R2 manager. I was told that the drive couldn't be expanded because of my cluster size. After doing some research online, I was told that I need to use a 3rd party program to get this done.

Loaded up Acronis and chose the resize option. Told it to use the maximum size and it said that it would need to reboot. I went ahead with it and it said it was successful. Got back into windows, look in my computer, double click on the drive, and windows states that it needs to be formatted first. Starting to get a sick feeling in my stomach.

I fire back up acronis and the drive shows up fine, and when I use the file browse mode, I can see my files still on the drive. What do I need to do in order for this drive to be usable in windows again. I can't loose this data.

What RAID card are you using, what RAID level are you at and what firmware is it at? Did you initially format with a cluster size of 4k? There is a 16tb limit if you did (http://support.microsoft.com/kb/140365). You really should use 16k cluster size with a GPT partition. Also, as far as I know when changing the cluster size with Acronis, it only changes the cluster size on free space, not on occupied space http://kb.acronis.com/content/14636. To fully utilize all this space as a single volume, you need to backup your data, blow away the volume, create a new volume with the proper cluster size and restore. Ask odditory about this and see if he knows a better way without volume reformat, but I don't think there is.
 
Last edited:
I was able to successfully shrink the partition back down to less than 15TB and I'm able to use it again in windows.

I used minitool partition manager to accomplish this. I think my next step will be using this same tool to change the cluster size to 16k, and then expanding the drive.
 
Back
Top