After OC, computer won't boot!

C

Chasx003

Limp Gawd
Joined
Sep 26, 2005
Messages
163
(sorry if this is the wrong section, but it has to do w/ overclocking...so whatever)

I have a Pentium D 930 and i was over clocking it. After i got the proc to about 3.2ghz (just wanted a small OC w/ stock cooling) i began to bump the ram up. I bumped it up to about 720mhz and 1.90 dimm core (or whatever). Now, whenever i turn on my computer, all my fans spool up and continue spinning. When everything was fine, they'd spool up for about a second, and bios would boot. bios won't even load up now, what am i to do?


Mobo - http://www.newegg.com/Product/Product.asp?Item=N82E16813135225

Ram- http://www.newegg.com/Product/Product.asp?Item=N82E16820141211
 
Turn everything back to stock settings and reset your CMOS jumper. Everything should come back on.

Your RAM probably won't overclock or your mobo won't hit the FSB you're trying for. Either way a CMOS reset will fix it.
 
Some motherboards will load default settings if you hold the del key as you turn it on.
 
thanks, right after i posted this i read that holding insert while booting resets the OC, thanks again.
 
You must log in or register to reply here.
Back
Top