advice on upgrade

gen3000

n00b
Joined
May 2, 2007
Messages
61
Ok,
so the time has finally come to upgrade my PC and I would really appreciate some help from you guys
Currently I have
2.8ghz P4
2gig pc3200 ram
120gig IDE drive
500gig external sata drive
7800gs+ agp (24pipe version)

I've been looking at getting one of the asrock dual vsta mobos to start with
also, I wanna put my 500gig sata as an internal (current mobo doesn't support it so its in an external exclosure right now)
I'm tempted to get a very small 10000 rpm for OS and a couple of other main stuff
The main upgrade I wanna get is a new processor, and im not sure whether to get q6600 or e6600
any other suggestions welcome
also, would i really suffer from running pc3200 ram with a dualcore/quadcore instead of some ddr2
basically, im not really sure what to get
the main things I do are gaming, and every now and then some converting, and dvd encoding.
my budget is around £200 but it's quite a bit flexible

thanks for advice in advance


edit: also will need advice on fans and anything of the sort, I will also need a new case (this one is way too small)
 
Reviews by Anandtech showed that DDR400 is still good enough for todays applications on the AsRock boards. These reviews were done on the quad's older version:
http://www.anandtech.com/showdoc.aspx?i=2810
http://www.anandtech.com/showdoc.aspx?i=2813
http://www.anandtech.com/showdoc.aspx?i=2814

Yourre on a tight budget, so a Raptor drive isn't worth the price premium. Go with a Seagate Barracuda 7200.10 320GB instead, for only $80. My raptor gets 78MB/s avg transfer rate, while my 'cuda gets 65MB/s; not bad for a drive thats less than half the cost, but has more than double the capacity. If you want a bigger drive, the Samsung 500GBs also perform on par or better than the 'cuda.

Your budget is £200 for what? CPU, Mobo, and Raptor?!

What size monitor do you have? If you want to improve gaming performance, you'll most likely have to replace that vidcard. I'd sell off your old parts to give you a higher budget for a new system.
 
Reviews by Anandtech showed that DDR400 is still good enough for todays applications on the AsRock boards. These reviews were done on the quad's older version:
http://www.anandtech.com/showdoc.aspx?i=2810
http://www.anandtech.com/showdoc.aspx?i=2813
http://www.anandtech.com/showdoc.aspx?i=2814

Yourre on a tight budget, so a Raptor drive isn't worth the price premium. Go with a Seagate Barracuda 7200.10 320GB instead, for only $80. My raptor gets 78MB/s avg transfer rate, while my 'cuda gets 65MB/s; not bad for a drive thats less than half the cost, but has more than double the capacity. If you want a bigger drive, the Samsung 500GBs also perform on par or better than the 'cuda.

Your budget is £200 for what? CPU, Mobo, and Raptor?!

What size monitor do you have? If you want to improve gaming performance, you'll most likely have to replace that vidcard. I'd sell off your old parts to give you a higher budget for a new system.

I may be able to extend the budget up to a very max of £300, but im not totally sure of that right now, I just know I will definitely have £200 to spend.
I just didn't suggest a barracuda of 320gb like you said, because I already got the 500gb version and wanted to use that as storage only. So I suggested a small raptor, perhaps another small barracuda for os?

I only have a 15" LCD currently.
 
Heh, if you couldn't tell, I copied/pasted that bit about the HDD from another post I made (it quotes the price in dollars while you're budget is listed in pounds). Anyhow, any 'cuda of the PRT 7200.10 line will be quite fast for the money, compared to a raptor. A raptor would cost much more, and only offer a little bit of speed increase... certainly not enough to warrant its price premium on a low budget upgrade.

The 7800GS will be fine for a 15" LCD. So, go with the ASRock 4CoreDual-VSTA. While a Q6600 would seem possible with your flexible budget, I wouldn't recommend it right now unless you think you really need one. I'd suggest the E6750 instead.

Whats your current case? Yate loon fans are good and cheap.
 
In my opinion, with that budget you're better off putting the money towards components that make a bigger difference in performance. You have 300 pounds for a full system upgrade? It's not going to quite cut it, you won't be able to get a Q6600 or an E6600.

Sure he could, if he goes with an AsRock board so he could re-use his DDR ram and AGP vidcard.

The E6750 would be a significant improvement over a P4 2.8Ghz.
 
In my opinion, with that budget you're better off putting the money towards components that make a bigger difference in performance. You have 300 pounds for a full system upgrade? It's not going to quite cut it, you won't be able to get a Q6600 or an E6600.
 
Whoa man these post switching things are crazy.

Asrock makes a board that does that? Oh...that's interesting. Cool, well it can be doable then, I think. However, they do get ripped off pretty badly over there and looks like both of us are back over here in the US..
 
Ok, just got another question.

Could someone tell me the difference between the e6600 and e6750, the e6600 isn't that much more. Which one is worth going for?
 
Could someone tell me the difference between the e6600 and e6750, the e6600 isn't that much more. Which one is worth going for?

E6750: 8 * 333 = 2.6Ghz, 1333Mhz effective FSB, 4MB L2 Cache
E6600: 9 * 266 = 2.4Ghz, 1066Mhz effective FSB, 4MB L2 Cache

The E6750 is newer and uses a 333Mhz base FSB instead of 266Mhz. The higher bus speed provides higher bandwidth. The recent batch of E6600 arent that great at overclocking. The E6750 is great at OC'ing; it replaces the E6420. The E6600 is replaced by the E6850.
 
So really the best to go for would be the e6850?

Yah, but its a bit overpriced right now, since its new. If you want a cheaper alternative, the E6550 should be nicely priced, as well as the E6750. They all OC very easily and have a lot of headroom.
 
Yet again, another question...
My current PSU is a blue storm 500w
Would I have to upgrade this or would it be sufficient?
 
Back
Top