ian_stagib
n00b
- Joined
- Jul 5, 2012
- Messages
- 9
Hi everyone
So I'm trying to plan out the next roadmap for my storage server. I've managed thus far to build it up as such:
Norco RPC-4224
24 x 2Tb drives (mostly seagate LP's)
1 x 250gb plain ol' sata drive for OS / VM's
2 x Intel Xeon L5520 (2.26ghz quad w H/T)
Intel S5520HC motherboard
24Gb ddr3
Corsair AX1200
Areca 1261ml
extra ibm hba
Current config:
Esxi 5.1
VM1 - Windows Server 2012 (runs downloader programs for now, used to manage storage before I changed to zfs)
VM2 - Openindiana: 2 x 12 drive zfs raidz2 pools placed into one vdev (both expansion cards were passed through to this)
The future plan and current idea (please comment on this):
I'm thinking of wanting to use openindiana to manage the drives. Have a big zfs pool there. I want to create an iscsi target (preferably one big iscsi target) on it and pass it to windows. Then windows can install ReFS on it and go from there
so some things i need to figure out:
1) how the iscsi target on openindiana would work. is it possible to have one big one? or must i make multiples? Can it expand without data loss when the pool grows?
2) does zfs on openindiana still scrub the data in an iscsi volume
3) would ReFS allow for expanding a drive capacity (just like ntfs did before) in this scenario
The reasons for my current thinking are:
- Windows is quicker and easier to set up basic shares and users
- SMB performance is better
- ReFS can handle long filenames now
- ZFS (if point #2 is true) could handle the data integrity
Anyway, thanks for any input guys. I hope this thread helps someone else out there
So I'm trying to plan out the next roadmap for my storage server. I've managed thus far to build it up as such:
Norco RPC-4224
24 x 2Tb drives (mostly seagate LP's)
1 x 250gb plain ol' sata drive for OS / VM's
2 x Intel Xeon L5520 (2.26ghz quad w H/T)
Intel S5520HC motherboard
24Gb ddr3
Corsair AX1200
Areca 1261ml
extra ibm hba
Current config:
Esxi 5.1
VM1 - Windows Server 2012 (runs downloader programs for now, used to manage storage before I changed to zfs)
VM2 - Openindiana: 2 x 12 drive zfs raidz2 pools placed into one vdev (both expansion cards were passed through to this)
The future plan and current idea (please comment on this):
I'm thinking of wanting to use openindiana to manage the drives. Have a big zfs pool there. I want to create an iscsi target (preferably one big iscsi target) on it and pass it to windows. Then windows can install ReFS on it and go from there
so some things i need to figure out:
1) how the iscsi target on openindiana would work. is it possible to have one big one? or must i make multiples? Can it expand without data loss when the pool grows?
2) does zfs on openindiana still scrub the data in an iscsi volume
3) would ReFS allow for expanding a drive capacity (just like ntfs did before) in this scenario
The reasons for my current thinking are:
- Windows is quicker and easier to set up basic shares and users
- SMB performance is better
- ReFS can handle long filenames now
- ZFS (if point #2 is true) could handle the data integrity
Anyway, thanks for any input guys. I hope this thread helps someone else out there