• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Adjusting 3.3v rail - cons?

A

ATW

Limp Gawd
Joined
Jan 27, 2003
Messages
476
Are there any ill effects of increasing the 3.3v rail over the long term? I'd like to pump 3.3v at the most through my RAM, so I'd need to adjust it up to 3.4-3.45. Also, does anyone have a write-up or guide for doing this on the PCP&C 510's?
 
You could cook your memory controller, PCI devices, etc. They all use the 3.3V rail.
 
If that's the case, how do I go about getting the voltage?
 
JTY said:
Does your mobo offer DIMM voltage adjustments?
Click to expand...

Yes, but I can only as high as the PSU is able to feed it. The most it recieves at this point, without adjusting the pots, is 3.15v actual vdimm, regardless of whether I set it higher.
 
You must log in or register to reply here.
Back
Top