Adding new RAM to an HP

MadMarkJD

Limp Gawd
Joined
May 2, 2006
Messages
135
After law school I finally had enough money to get a nice computer, but I got lazy and bought an HP media center primarily because it came with a cheap dual core AMD. It has one gig of ram and I'v added a 7900gt or gs I forget. I love my video card, it is lo latency so i am able to run it on my stock 350w PSU despite what the idiots at bestbuy told me.

I want to add at least another gig of ram but I'm not sure what to buy, I want to make sure that it is compatable with what I already have. But seeing as how I don't know what kinda of ram I currently have I am clueless as to what to get.

Any suggestions would be welcome, thanks
 
Go to www.crucial.com. They have a nice tool on the front page that you put in your make and model of pre-made computer and it will tell you which RAM you need. Open your box and see how many open slots you have and proceed.
 
Chances are you're looking at DDR2 667. Just to be sure, download CPU-Z and post the info from the "Memory" and "SPD" tabs.
 
What model HP do you have?
Also, you may have to determine if your AMD is a socket 939 or AM2. I recently upgraded the RAM on a Compaq and a HP. Both were older socket 939 bought in 2006.
Adding RAM is a big leap for these pre builds.
 
thanks for all the replies.

I am currently at work and I forget what my model number is.

I do know that I have a AMD X2 3800 on a 939.

which just goes to show you why our hobby sucks so bad, I mean take baseball cards, those are easy I mean you buy a card and BAM your done. But here I buy a sweet dual core not even two years ago and already my mobo is outdated and if I want the next new thing (AMD quad cores please and thank you) then I have to buy a bunch of new shit.

and it all started when I needed a math co-processor to play Doom 2 on my 486 so i convincied my dad that if we didn't get a pentium then the computer would melt haha or something like that.
 
Most prebuilds come with minimal ram to get the OS going. Adding a Gb of ram will easily pick up the pace, just like any other pc.

@MadMark: Your pc uses DDR400, you can get a 1GB kit (2x512mb) for about $55. A 2GB kit will be even better at about $100. Just go with value ram from a good brand. GSkill has worked for me in the past for HP/Compaq.
 
Thanks for the help i appreciate it.


I still find it funny that I can get 2,000 megabytes of ram for 100 bucks. I remember when the going rate was a dollar a meg. I'm glad that price point didn't hold out. :)
 
I actually have a set of those, they're pretty good. $90 is a good price, i paid $115 back in June.
Just don't plan on getting massive OCs with them.
(i'm [H]Lite now!! 64th post)
 
Any RAM with lifetime warranty will do, and G.Skill is fine. Too bad you missed the deal for $20/GB of DDR400 a week or so ago.

If you have a 7900GT on a 350W HP PSU... I'm afraid that PSU will give out sooner than it normally would have without such a huge power-hogging vidcard. I'd raplace that soon, probably with an XClio Goodpower 500W for only $50 - great budget PSU (good quality). If you'd rather wait, just hope the PSU doesnt take out any other parts along with it.

I replaced most of the parts in an HP/Compaq system because the kid threw a 7800GTX in there, and when the PSU went out after a few months, it took out the motherboard/CPU/RAM along with it.
 
I replaced most of the parts in an HP/Compaq system because the kid threw a 7800GTX in there, and when the PSU went out after a few months, it took out the motherboard/CPU/RAM along with it.

Man, hope the kid learned his lesson. What happened to the GTX?

Anyway buying link for the XClio Goodpower to save you some time:
XCLIO Goodpower 500W PSU - $50
 
Thanks for the help i appreciate it.


I still find it funny that I can get 2,000 megabytes of ram for 100 bucks. I remember when the going rate was a dollar a meg. I'm glad that price point didn't hold out. :)

You are making me feel old. I remember when it was $50 per MB. :mad:
 
Thanks for the heads up about the PSU, I never considered it going out.

I'v put the 7900 in there 9 months ago and it ran fine so I didn't worry about it.

Guess I need a a new PSU as well, damn.
 
Man, hope the kid learned his lesson. What happened to the GTX?

Well, he did it to both his and his bro's systems, but only his took out all those components. The 7800GTX wasn't harmed, amazingly. His bro didn't have the money to replace his PSU, so he took a chance. It actually lasted a few months longer before it started to show symptoms: the system would have trouble powering on. He replaced it with the Goodpower, too, and its been working fine for a year or so (I'm guessing, since I havent heard from them, lol).

@OP: FYI, the 7800GTX consumes more power than the 7900GT/GS, so you may be safe for a bit longer before you need a new PSU. The PSU usually doesn't take out other parts, but there is still a chance that it could.
 
Thanks for the heads up about the PSU, I never considered it going out.

I'v put the 7900 in there 9 months ago and it ran fine so I didn't worry about it.

Guess I need a a new PSU as well, damn.

Wow you really live life on the edge! I put a Seasonic in mine just for a 7600GT.
 
How much power do I really need?

I have a amd x2 3800
2 dvd-roms (although they are never run at the same time)
a network card
1 gig pc3200 ram
my 7900 video card
one case fan
and one hard drive

stock keyboard and mouse
 
FYI, when you first power your system on is when you would need the power, since thats where theres a huge load on your system. The only other time theres a huge load on your PSU is when your components are being worked (CPU/GPU, etc; eg. when encoding some video).

You need around 350W with 23A on the +12V rail, but you might want some headroom to work with in the future, if and when you add more drives, etc. The XClio Goodpower 500W with 28A on the +12V rail will serve you well.

If you want to go crazy and pickup a Seasonic/Corsair, the 520W has 40A on the +12V rail. Most newer systems draw most of its power from the +12V rail, so the amperage available on the combined +12V rails is more important than wattage. BTW, you do NOT just add the multiple +12V rails' amperage ratings to get the combined available amps. It either has to say it explicitly or you need to do some math. Also, go with a quality PSU. Here are some PSU suggestions:
http://www.jonnyguru.com/forums/showthread.php?t=1460
 
If you're good at hiding cables you can go with the Corsair VX-450 also. Its not modular, but its a great psu for the $$.
 
Thats probably why its lasted as long as it has, I only fully shut my computer down maybe twice a month, haha. I don't even let it hybernate.
 
Back
Top