Adding bootable OS's to the boot.ini on different discs and controllers

[kleox64]

Heres the problem,

A Hard drive on the Intel controller with a bootable XP Partition (partition 1)

A RAID 1 set connected to the SI3114 RAID controller (ports 3 and 4), this contains a bootable W2K3 partition.

Note that we have 2 different boot.ini's, the one on the RAID 1 set iam not going to touch.
The only way to boot from the RAID 1 is to change the boot priority in the BIOS.

Now i want to boot the RAID 1 set partition by adding that OS to the boot.ini on the intel controller. Someone please explain to me the different sections of the boot.ini.

i.e.


multi(0)=?
disk(0)=?
rdisk(0)=?
partition(0)=the partition number which is 1 in this case.

 

[[MS]]

This explains it all:

http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/prmc_str_masc.asp