• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Adding a 3.5mm jack to front panel

K

kevineugenius

[H]ard|Gawd
Joined
Dec 9, 2006
Messages
1,415
So, take a thin piece of metal/plastic, drill a hole in it, insert a 3.5mm jack into the hole and boom: done. Sadly, I can't find the jack. I'd prefer female to female but if the inside half were male that would work just fine. Closest I can find is this: http://www.mcmelectronics.com/product/27-5937&scode=GS111&CAWELAID=838522564 but the mounting bezel on it is a hex which is a little uglier than I'd hoped and it has some bad reviews about the sound quality not being very good. All the others I've found are like this: http://www.altex.com/35mm-Stereo-Female-to-Female-Bulkhead-Adapter-Nickel-30-295-P139157.aspx which is basically perfect except the visible part sticks out like a half inch and I'd like it to be fairly flush against the front panel. Anyone know of such an item? There's RCA, coax, and bare-wire ones all over the place, just can't find a good 3.5mm.
 
You must log in or register to reply here.
Back
Top