![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Hi
I have successfully setup my file server running ESXi 5 as the master OS, passing the controller through using DirectPath I/O to a ubuntu 10.04.4 x64 VM
As I use a MacBook and the GUI only works on windows I have a VM running on the Mac inside VMFusion (Windows 7 Pro) with Adaptec Storage manager installed.
I can connect to the host no problem at all, it detects all 8 drives connected too
The only option I seem to have enabled is the ability to create a hot spare out of one of the disks.
As you can see by the attached image, I cant create anything, change any settings etc.
All I can think is that I logged in using my username and not root, but I can't login as root!
Am I missing something?!
I have successfully setup my file server running ESXi 5 as the master OS, passing the controller through using DirectPath I/O to a ubuntu 10.04.4 x64 VM
Code:
root@nas:/usr/StorMan# /usr/StorMan/arcconf getconfig 1
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SAS/SATA
Controller Model : Adaptec 5805
Controller Serial Number : 8B26106A941
Temperature : 68 C/ 154 F (Normal)
Installed memory : 512 MB
Copyback : Disabled
Background consistency check : Enabled
Automatic Failover : Enabled
Global task priority : Medium
Performance Mode : Default/Dynamic
Stayawake period : Disabled
Spinup limit internal drives : 3
Spinup limit external drives : 0
Defunct disk drive count : 0
Logical devices/Failed/Degraded : 0/0/0
SSDs assigned to MaxCache pool : 0
Maximum SSDs allowed in MaxCache pool : 8
NCQ status : Enabled
Statistics data collection mode : Enabled
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (17544)
Firmware : 5.2-0 (17544)
Driver : 1.1-5 (2461)
Boot Flash : 5.2-0 (17544)
--------------------------------------------------------As I use a MacBook and the GUI only works on windows I have a VM running on the Mac inside VMFusion (Windows 7 Pro) with Adaptec Storage manager installed.
I can connect to the host no problem at all, it detects all 8 drives connected too
The only option I seem to have enabled is the ability to create a hot spare out of one of the disks.
As you can see by the attached image, I cant create anything, change any settings etc.
All I can think is that I logged in using my username and not root, but I can't login as root!
Am I missing something?!