• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

ACPI Bios errors

areamike

n00b
Joined
Dec 29, 2007
Messages
23
Well, I have asked this over at the MSI Forums, the place where my motherboard is supported and no one seems to know the answer.

Here's my dilemma.

http://support.microsoft.com/kb/330054
AMLI: ACPI BIOS is attempting to create an illegal memory OpRegion, starting at address 0xffffffff, with a length of 0x1000. This region lies in the Operating system's protected memory address range (0x100000000 - 0x130000000). This could lead to system instability. Please contact your system vendor for technical assistance.

There's the problem I am having. I have tried all BIOS version for my MOBO and I still get these errors in my event viewer when using XP.

If I try to use Vista, I get a BSOD , BIOS is not Fully ACPI compliant. I can run Vista just fine with 2GB memory, but with 4GB, I get the Stop Error 0x000000AF - Bios is not fully ACPI compliant.

So I have finally ruled out all hardware problems and this indeed appears to be a BIOS problem with this motherboard. I have contacted MSI Support and they say to check the FAQ, check the Manual, check the Forums etc. So here I am. Manual is no help, there is nothing in the MSI FAQ and I have searched the MSI forums. I think the only way this will be resolved is with another BIOS update from MSI for this Motherboard.

Anyone have any input?

Edit: Additional Info. I've tried every BIOS version. I have tried setting BIOS to defaults. I have removed all but necessary hardware. I have upped my PSU. I have tested all memory with Vista's memory checker and memtest86 overnight on both sticks and it passes everything. I have tried everything I can think of and the error still persists. However, even after extensively testing my RAM, could it still be bad?
 
Back
Top