Ack...Soltek Board and ECC

:LJ:

[H]ard|Gawd
Joined
Jun 6, 2002
Messages
1,348
Guys,

I've got a Soltek K8AV2-RL board, which works fine with the 2x256MB KingMax PC3500 I've got installed. However, I need more memory for the stuff I'm doing right now (fairly heavy Java development), and I've managed to pick up 2x512MB Samsung PC2100 ECC. In the past (with other boards), it's just been a case of reconfigure the mobo to handle the lower speed memory and swap it in. However, it doesn't matter what I do (hell, I've even tried it at PC1600), I get the dreaded beeps when I try to boot. I've updated the BIOS, reduced everything to the lowest common denominator, and still nothing.

I know that at least one of these sticks works. Is this a failing of the board? Or is it the chipset (K8T800). I can't believe that it's the chipset, because I thought they used it for the Opterons...?

Anyone got any bright ideas?
 
ECC Registered is For Opteron's and FX 940 socket cpu's. ECC doesn't work on any a64 754 and 939 pin cpu's. I suggest you go pick up Normal memory No ECC stuff.
 
To clarify Mr. Wrench's comment:

The Socket 754 and 939 Athlon 64's can only use non-registered memory.

The Socket 940 Athlon 64's can only use registered memory.

ECC doesn't matter, however, most ECC memory is typically registered (as it is aimed at the server/big tin market).

The reason the chipset can be the same between all Athlon 64's is that the memory controller resides on the processor and not in the chipset.

Typically, registered memory has one or two extra small chips either in the middle of the stick or at the base of it... this is how you can tell...
 
Thanks, guys....not the answer I was hoping for, but at least I know now. I had a feeling there would be something dicky about the memory controllers, I just didn't know exactly what - I did hope that while the Opterons supported only Reg DDR, the A64 support Reg and Un-reg. Oh, well...anyone need a GB of reg ECC RAM? :p
 
Back
Top