Acer AL1916 Restarting?

ThePriestMike

2[H]4U
2FA
Joined
Apr 20, 2001
Messages
3,492
I sent Acer an email but still have yet to hear back from them, maybe someone else has run into this.

Model is an AL 1916 and had a built date of 2/06

After about an hour of being on and working fine this monitor will just keep restarting over and over and over again. If you unplug it and plug it back in it will work for a few mins and then start to restart over and over again. I think it is overheating but that is just my guess.

anyone seen this before?
 
Sounds like a heat/power supply problem...bad caps? Open that baby up if it is out of warranty and check, a bad cap is pretty easy to notice, all swelled/bulged or even popped at the vent on top.
 
I will check but i think it is still under warranty.

otherwise if the caps are leaking ... easy fix? just find someone with a good bench setup to soder things?
 
This could be a power supply issue or a problem with your DVI / VGA port. A lot of older monitors like the VX2025WM and my 21" Gateway had this type of issue. I had it for awhile but after a couple weeks of unplugging and re-plugging the DVI cable while the power was still on it went away.

If you are using DVI, try using VGA or vice-versa. See if the problem persists.
 
I will check but i think it is still under warranty.

otherwise if the caps are leaking ... easy fix? just find someone with a good bench setup to soder things?


Yes, if you find bad caps, a small solder iron (I use a small butane type) can get the old ones off, and soldering new ones on is easy. I am sure you have a friend that has some knowledge and tools of soldering if you don't feel comfortable. If you look around, there is a basic soldering guide here somewhere (or on the net) with some basic tips that will get it done.

When I fixed my last LCD a couple weeks ago, I just called Radio Shack with the numbers/specs from the cap and got all 3 new ones for $5.19. You have to use the same microfarad (uf) rating, but you can use a higher voltage, ex., a 1000uf cap @10v, you could use a cap that was rated 1000uf @30v. The one I fixed was an HP 19" that my work was tossing in the dumpster, it's a glossy screen with speakers and makes a fantastic secondary/backup display. It looks brand new!!
 
We have those same monitors at my work and they started off doing the same thing. They dont turn off and on as much as it sounds like yours do, ours randomly turn off every once in a while. But a lot of our monitors have completely shut down out of the blue. Ive had two go bad in my office alone in the last year.

Let me know what you find when you open yours up. Im gonna try do the same when i get some time.
 
Back
Top