About Teaming

Shainonex

n00b
Joined
Nov 15, 2006
Messages
44
I enabled Teaming in Nvidia network and now my network reads 2Gbps

do I need to use both Ethernet or do I only need 1 ethernet port even if it is teaming?
 
You need both and your not going to see a significant benefit if you are just plugged into a router.

Teaming will really shine if you are doing file serving with the box and have a raid to push and plenty of users to hit your device.

Teaming will really shine if you have two high speed Internet connections and you really want to shotgun those downloads.

Teaming into a switch or hub for a normal home office without pushing media or something of that sort across the switch.. and again your throttle point will be the listening devices.

So first... yes to use teaming you need to enable both ports.

Second. What are you doing where you think teaming will be an asset to your configuration?
 
You need both and your not going to see a significant benefit if you are just plugged into a router.

Teaming will really shine if you are doing file serving with the box and have a raid to push and plenty of users to hit your device.

Teaming will really shine if you have two high speed Internet connections and you really want to shotgun those downloads.

Teaming into a switch or hub for a normal home office without pushing media or something of that sort across the switch.. and again your throttle point will be the listening devices.

So first... yes to use teaming you need to enable both ports.

Second. What are you doing where you think teaming will be an asset to your configuration?

I was wondering what it is for when I read the manual I tho it would boost my internet speed from a router + cable modem... Well I guess I was wrong then I guess I will have to disabled that =[ Plus I don't have 2 internet connections because if I want 2 they wouldn't let me have 2 in my room 1 must be in my room and the other must be in another room somewhere separately so how will I have both together in order for me to do that? It would be impossible :mad:
 
In your shoes the best bet is. Just disable teaming and don't worry about it again.

Tell me what your Internet connection is. Based on what you just said you have a connection in each room? Or do you mean that you are using DSL? And it is off of your phone jack?

I have a coworker who does the teaming though admittedly he does his teaming via a router I believe but here is the premise.

He subscribes to a Cable modem service for 40 dollars a month as well as a high speed dsl service for say 54 dollars a month.

His downstream on his cable modem is 8mb (Megabit not Megabyte.)
His upstream on the cable mode is 256kb.

Downstream on the DSL is 6mb
Upstream on the dsl is 512kb

Via teaming his downstream theoretical limit is the sum total.. or 14mb down and his upstream is 768kb up.

That is just an example. But that is what teaming is for. Or for server environments. IE the controller can do it.. so they give you the option. In 95% of home installs it won't do any good. But for those of us that have this mobo on a file server hosting a raid five array of 12 terabytes of High definition videos (Pron) teaming allows us to stream content to multiple rooms in the home simultaneously and makes that raid 5 array's bandwidth more worth while.

I really hope that helps and doesn't collude things too much for you.
 
fwiw I enabled teaming on my 680i board just for the hell of it (was bored, but I learned a valuable lesson). Long story short...it fubared my network connections to the point that even re-installing Vista after a complete format still wouldn't let me pull an ipaddress. I had to actually flash the bios and erase all cmos settings and re-set everything to get it to pull an ip.

Lesson learned...the 680i is flaky enough with quad cores... don't try to utilize other supposedly supported features as it's asking way too much of the nvidia chipsets.
 
In your shoes the best bet is. Just disable teaming and don't worry about it again.

Tell me what your Internet connection is. Based on what you just said you have a connection in each room? Or do you mean that you are using DSL? And it is off of your phone jack?

I have a coworker who does the teaming though admittedly he does his teaming via a router I believe but here is the premise.

He subscribes to a Cable modem service for 40 dollars a month as well as a high speed dsl service for say 54 dollars a month.

His downstream on his cable modem is 8mb (Megabit not Megabyte.)
His upstream on the cable mode is 256kb.

Downstream on the DSL is 6mb
Upstream on the dsl is 512kb

Via teaming his downstream theoretical limit is the sum total.. or 14mb down and his upstream is 768kb up.

That is just an example. But that is what teaming is for. Or for server environments. IE the controller can do it.. so they give you the option. In 95% of home installs it won't do any good. But for those of us that have this mobo on a file server hosting a raid five array of 12 terabytes of High definition videos (Pron) teaming allows us to stream content to multiple rooms in the home simultaneously and makes that raid 5 array's bandwidth more worth while.

I really hope that helps and doesn't collude things too much for you.

I have a cable internet it is called Optimum Online Boost of a 30Mbps down and 5Mbps up I pay $30 for that every months. I asked for another one and asked them if it can be put in my room together with the cable modem I have now they say no it must be installed in another room separately :( so I cancel it
 
I have a cable internet it is called Optimum Online Boost of a 30Mbps down and 5Mbps up I pay $30 for that every months. I asked for another one and asked them if it can be put in my room together with the cable modem I have now they say no it must be installed in another room separately :( so I cancel it

Purchase the service for your "neighbor", but put the second modem in the same room.
 
Purchase the service for your "neighbor", but put the second modem in the same room.


I will try that but who is gonna install [such as cut the cable wire and put them together and hook it up in my room with the other modem] ? I have nobody with that skills to do it...
 
I will try that but who is gonna install [such as cut the cable wire and put them together and hook it up in my room with the other modem] ? I have nobody with that skills to do it...

?You?


Hooking up a cable modem is basically the same as hooking a tv up..
 
you can get the supplies to cut/splice coax at any hardware store as well as walmart I think. a simple crimp tool will cost you about $10, the connectors on the other hand are what can be expensive :)

it's easy stuff though.
 
Have them install it in another room. big whoop... then when they are gone fine a connecting wall. drill a hole.. or run a really long ethernet cable... and wala... double the bandwidth. ;)
 
What are you guys talking about? Teaming is not load balancing....

Teaming is technically using two NICs, one for receive and one for transmit. This is great on servers and large switches where the bottleneck is the NIC connection, but it has no use for combining two internet connections.

You could maybe stretch the definition of teaming and say you are teaming the two modems to your house, but that is a real stretch of what it is.


Frankly unless you are running a server that is serving tons of files to 100s of clients, there is no need for teaming. Plus you have to have equipment down the line that can take advantage of it as well (for example teaming switches) to even make it worth while or else the switch will just be the next bottleneck.

A single nic can easily max out pretty much any internet connection, even fiber which is faster than 2 or 3 cable modems combined and load balanced.
 
You know what that is my bad... damnit what is the process called when you use two connections and effectively get more bandwidth from it... Aggghhh...

I'll have to ask Jason at work because I can not remember what it was called to do that.

My apologies for the wrong freaking definition.
 
You know what that is my bad... damnit what is the process called when you use two connections and effectively get more bandwidth from it... Aggghhh...

I'll have to ask Jason at work because I can not remember what it was called to do that.

My apologies for the wrong freaking definition.

Load Balancing?
 
You know what that is my bad... damnit what is the process called when you use two connections and effectively get more bandwidth from it... Aggghhh...

I'll have to ask Jason at work because I can not remember what it was called to do that.

My apologies for the wrong freaking definition.

No problem, I was just confused at what was going on in this thread :p

Load Balancing is the term.
 
Hummm... load balancing is the premis... but is that the term... I remember doing this back in the day for my modems to duel channel my stream into the internet before cable modems or dsl... I want to say it had some hip term then.

Anyway yes the real term is load balancing. My apologies for confusing the op. ;) Either way turn it off. lol.
 
Hummm... load balancing is the premis... but is that the term... I remember doing this back in the day for my modems to duel channel my stream into the internet before cable modems or dsl... I want to say it had some hip term then.

Anyway yes the real term is load balancing. My apologies for confusing the op. ;) Either way turn it off. lol.

I thought it was aggregation?
 
Shotgun technology is what I was thinking of with modems... sounds like everyone has a term...

I think load balancing may not be it because if you have one pipe larger than the other you get a loss of beniift... like having a 200 and an 300 gig drive in a raid 0... you will only get 400 gig of space.
 
Shotgun technology is what I was thinking of with modems... sounds like everyone has a term...

I think load balancing may not be it because if you have one pipe larger than the other you get a loss of beniift... like having a 200 and an 300 gig drive in a raid 0... you will only get 400 gig of space.

No, you can load balance a T1 and a cable modem for instance with out crippling either.
 
What are you guys talking about? Teaming is not load balancing....

Teaming is technically using two NICs, one for receive and one for transmit. This is great on servers and large switches where the bottleneck is the NIC connection, but it has no use for combining two internet connections.

do YOU know what you're talking about? NIC teaming is precisely that, creating one logical connection that two or more physical connections use to share the "load". You explanation of teaming is horribly incorrect as well, I suggest that you do a quick read on the aggregation algorithms before speaking anymore.:rolleyes:

I think load balancing may not be it because if you have one pipe larger than the other you get a loss of beniift... like having a 200 and an 300 gig drive in a raid 0... you will only get 400 gig of space.

No, you can aggregate different speed circuits like Okie said without an issue in a multilink group fine. Etherchannel on the other hand(with either negotiation protocol) will technically not work or break the bundle if you have Ethernet links that are different speeds, same goes for duplex.
 
Woot thanks for the update phil... had me questioning my awsome understanding of all things technological...

ok not really but still thanks for the update.
 
do YOU know what you're talking about? NIC teaming is precisely that, creating one logical connection that two or more physical connections use to share the "load". You explanation of teaming is horribly incorrect as well, I suggest that you do a quick read on the aggregation algorithms before speaking anymore.:rolleyes:

QFT! Own3d :D

p.s. IP hash :)
 
do YOU know what you're talking about? NIC teaming is precisely that, creating one logical connection that two or more physical connections use to share the "load". You explanation of teaming is horribly incorrect as well, I suggest that you do a quick read on the aggregation algorithms before speaking anymore.:rolleyes:


Oh snap. pwned
 
Bonding ? Diamond and BOCA used to call it shotgun technology

Yup...Diamond had their "Shotgun" technology, someone else had one called "Colt", WebRamp and 3COM used to sell routers that had up to 3x 56k modems on the outside which worked together. And with DUN1.3 or DUN1.4...Windows 95 supported it natively..called "MultiLink". I used to run a 56k and a 33.6 modem together with Multilink back when I resold for an ISP.

Back to OPs post here....teaming NICs won't help for diddly with an internet connection unless you have at least a 100 meg pipe to your house..and heavy concurrent loads being pulled from it faster than your hard drives can supply.

There are load balancing routers out there which will balance the load across several connections...I've setup a few, and even used to run both cable and DSL at the same time at my house. You don't get the sum of the speeds..say DSL is 3 megs and cable is 8 megs..that doesn't mean you get 11 megs of speed. Yet...you can get almost 11 megs worth of throughput overall...if you have enough systems to create that sort of load (1x single desktop PC will not be able to...it becomes worthwhile with large networks).
 
Back
Top