Abit NF7-S Rev 2.0 Problem

MoDsQuaD

Limp Gawd
Joined
Aug 11, 2003
Messages
389
Alright, so first off it is a refurb from newegg, just to get that out of the way.

Booted up fine, checked the bios settings, seemed the bios had to be flashed to the current version, but was running.
Checked the pc health status and the cpu temp shows up as N/A, so I reboot, check it again, now the voltages were all screwed up and the system temp was something like -17c/- 170 something or other, still cpu temp was n/a, the voltages seemed fine.
Really weird.
So I flashed the bios to bios version 21 from abits site, checked, still flaky.
In anycase its going back to newegg, its too bad because Ive had boards that were great, like new from the egg.
Anyone had a similiar experience with an abit board.
I do realize I could get a new bios chip to try out, but Im just gonna rma it.....:(
 
Ok, so I removed my processor and noticed underneath the cpu in the middle of the socket and in the actual socket it looked like some kind of clear grease, not a real thick layer, but defiantly something covering the sensor and stuff underneath the processor.
So do you think that I should clean it off? and if its just grease it should not really affect it should it?
Can't really get in the socket itself though
 
sounds like someone used it for some subzero cooling and returned it
the grease is probally dielecrtic grease
 
Back
Top