Abit NF7-S Northbridge Cooler

runt

2[H]4U
2FA
Joined
Mar 16, 2000
Messages
2,443
ok, the north bridge fan on my nf7-s is starting to make noise and i would like to replace it for that reason. the swiftech solution is out due to cost (for right now at least). i am looking at the zalman zm-nb47j right now, but why does the zalman website say
1. ZM-NB47J does not require a fan, thus does not need to be powered, and does not generate noise
or vibration.
2. The Northbridge chipset can be cooled to an optimal temperature without generation of noise.

※ Recommended CPU Coolers
CNPS6000 (Socket 462), CNPS6500B (Socket 478), CNPS7000B (Socket 462/478/754/939/940),
and CNPS7700 (Socket 775/478/754/939/940) allow more stable and silent operation.

Compatible Northbridge Chipsets
1. ZM-NB47J is compatible with all Northbridge chipsets that do not have a built-in graphics core.
2. Northbridge chipsets with built-in graphics core are compatible ONLY IF the following conditions
are met.
1) The Northbridge chipset MUST be located between the CPU socket and AGP (or PCle) slot.
2) The CPU cooler must be one of the Recommended CPU Coolers mentioned above.
?

the part that worries me is that they say that you must use one of their cpu coolers. i have a swiftech mcx462-v right now, would that work fine with the cooler?
 
Those are recomendations. I think only one of those are 120mm coolers so it is not because of air flow over the NB from the CPU cooler. The reason they recomend it is becuase they know those won't hit the NB cooler if all those conditions are met.

Since your cooler is a 80-92 fan cooler, you should be fine. But if it does touch, just tweak the NB cooler a little so they don't touch.

I have the Zalman NB on two of my systems and it touches the XP-120 on my mATX board, and it doesn't touch my SI-97 on my other mATX board. I am replacing the SI-97 with a Thermaltake Sonic Tower Thrusday of this week, so I will have to see if it clears it.
 
well, when you get it...let us all know how it works for you.
 
You should be able to go fanless on the nForce 2 chipset, although a fan blowing on it will really help it out. My system was 100% stable with just the stock heatsink solution that Asus provides, so if your fan is noisy on the Thermalright, then take it off, it should be fine.

Btw Thermalright makes a kickass heatsink, much better than Zalman I feel.
 
i wanted the swiftech, but just can't afford it right now :(
 
Back
Top