Abit IC7 Northbridge replacement

Chelica

2[H]4U
Joined
Aug 8, 2003
Messages
2,698
I was wondering on which manufacturer sells a quiet Northbridge replacement HSF for the IC7 mainboard? I think the only thing that is loud on my setup is the Northbridge. If anyone knows, please post here.

Thanks.
 
I got a Swiftech MCX159-P, and it is much more quiet than my old NB HSF. If you want total silence, you can run the MCX159 without the included fan and only get slightly higher temps.
 
Thanks for the advice. Will be saving up some cash for one of those.

Is that the only option I have? And when you say that it will run a bit hotter, does that mean that CPU will run hotter or the system temp will run hotter? Right now the system temp is at 26.

Alex
 
Without the fan, the northbridge temps will go up. My temps with fan is 35-40c, without fan the temps go up to 50c. With the stock NB HSF on the board in my sig, I was getting over 50c all the time. The CPU temps should stay the same. There are some other options. Thermaltake makes one called the "Extreme Spirit", but it is loud and ugly. Thermalright makes one, but it doesent perform as well as the Swiftech because it is made of Aluminum. The only other one that I know of that can perform as good as the swiftech is the Microcool Northpole.
 
Yeah, I just got done reading a review on the NorthPole and it said that it is a really good Northbridge HSF but it is loud as hell.

As long as the MCX159-P is not as loud as the stock Abit Northbridge fan then all is good.

Thanks.
 
That Zalman NB Heatsink is pretty cheap, wow. So it performs better than the stock Abit NB fan?

Also, do you guys know if it would fit just fine since I have the Zalman 7000ALCU?

Thanks for the link BTW.

Alex
 
Wondering if the Zalman passive cooling for the Northbridge will fit with the Zalman 7000ALCU installed *bump*
 
One of the ring mounts for the NB hsf on my IC7 just broke off. I have an SLK-900 and I think there was a little pressure against the NB. I need somehting that will fit an IC7 with SLK-900. Anyone know if the MCX159 will do it, and if not, what will?

P.S. I don't think I can use the ringmounts anymore unless the clip is reversable for the NW/SE combo.
 
I have not taken off my NB HSF on the IC7, but are there mounting holes on them if you were to take off the HSF or what?
 
i have a thermaltake tiger 1 on my comp and its not loud, and my friends IC7 fan is dying and hes gonna get a tiger 1 also.
 
I will have to give that one a check. Do you think it will fit even tho I have a Zalman 7000ALCU installed?
 
I dunno, but the IC7 looks pretty fragile. I was going to worry about that once I have the replacement Northbridge in hand, lol.
 
Originally posted by Chelica
I will have to give that one a check. Do you think it will fit even tho I have a Zalman 7000ALCU installed?

I have a 7000ALCU, and it fit fine for me. I just epoxied the heatsink onto the northbridge, and it worked perfectly. It cools better and, of course, it's silent.
 
Originally posted by Biddle
I have a 7000ALCU, and it fit fine for me. I just epoxied the heatsink onto the northbridge, and it worked perfectly. It cools better and, of course, it's silent.

Nice, thanks. I really wanted to hear from someone that has the same setup as me. As for the epoxy, which one did you use? Any links to them or can I just get any type?
 
Back
Top