Abit IC7-G SATA Controller died.?!?

Celsius

Gawd
Joined
Jun 16, 2004
Messages
723
Anyway its really pissed me off so instead of doing the RMA thing, I haul my ass up to bestbuy and buy the adaptec serial sata card and let me tell you. Big difference!! Perhaps the is was never right to begin with.

Anyway for those of you with issues you might want to look at getting an addin card.


My games load super fast bootup time is much better. Watching movies from ISO, no more shaking.
 
Good work, I did the same thing but mine did not stop working on my mobo I just bought a controller just so I did not have to run onboard SATA(it sux) .... :D What card you get? I have a 2 port silicon controller it is nice and does everything I need.
 
I have never had a problem with my onboard SATA, i have a Abit duramax. What problems were you having with your onboard, because right now i am only running one 120 seagate and havent noticed any problems, is there something i should look for.
 
It makes it very hard to OC and almost imposible to do so, I just found I can get way better OCs when I use a controller, but anyone will tell you that.
 
Your right, it was impossible to overclock! I was starting to really get pissed. Then I'm like its not getting pissed over 45 bucks for a controller card. When I would boot it would never show up in the bios. I reset the bios (jumpers) and wait about 2 mins and start over.
I got the Adaptec Serial ATA with two controller ports on it. At first it would just get to the windows login screen and then reboot.

I changed it over to the port on the motherboard and then loaded the drivers for the card (DOH!) that was installed. Shutdown and the bios for the card popped up F3 I believe and asked me which was primary. Rebooted again and then windows booted up faster than I had ever seen it I expected a blue screen but nothing. So, I rebooted and decided to overclock my 2.4 to 3.2 (thank you intel) and I played 4 hours of command and conquer generals with no straggering at all. Even thing just seems to be smoother.

I'm thinking back to my scsi days and remembering how fast and stable those drivers were. I guess asking a motherboard to do everything is not the smartest thing to expect. I would not use the onboard sound so why would I expect the same from the controller.

The stange thing is that it worked with my EIDE ports but it would stagger in games a little but also take a while to boot up. I guess they are on different lines of communication than the sata controllers. From what I saw when ever I overclocked the sata drive would not detect at all.

I even went as far as getting the newest bios for greater sata control. I don't know who they were thinking about because it didn't apply to me and my issue. These high-end motherboards are expected to be overclocked. I would have believed that they would have check this before releasing this upon the public. I already RMAed the board once because of the buzzing sound coming from the mic.

wow that was a rant.

I would ask yourself is anything slow to do with games take a while to boot and what is the feel while inside of the game while a lot is going on? Shuttering, Slowdowns and you know its not the ram or the chip. It might be your controllers. :D
 
well good deal now you can OC like a mofo and no have to worry and yeah SATA cards rule, i dont think they should even put sata on mobo but i am sure some people use it
 
yea, i do not OC at all because i have not cooling system right now, so i use the onboard because it doesnt effect me yet.

now i will get a card when they come out with a newer speed sata like sata 300 would be nice :p !
 
There is no problem OC'ing with the onchip SATA controller, which is the (preferred) Intel controller. I have never used the SI controller, so can't say whether or not that interferes with OC'ing. But, if you only have one RAID setup, then you should use the Intel controller anyway because it has better performance over the onboard SI controller.

Two other issues that may cause problems with the Intel SATA controller: BIOS and PCI clock. There were a few BIOS versions that caused such problems. Latest BIOS 2.8 has no such problem. PCI clock should be FIXED at 66Mhz.
 
I have had no probelms overclocking with the on board sata controllers.Perhaps it is a bios issue.

I am using the Intel for my Raid 0 and using the Silicon just for a single back up drive and i have a great overclock. 250FSB I've tried using the Silicon for my Raid, but i feel the intel raid is just a little faster with loading.

The only thing i've seen that limits overclocking on these boards is the VCore does not go up high enough, no matter where i set it, it will only show 1.75V.
 
Back
Top