Abit AV8, 9F error, anyone?

Avengeance

Gawd
Joined
Apr 10, 2004
Messages
773
Well I got my comp all setup and once in a while, while restarting, the comp would shut itself off while booting up randomly. Then when the comp turns off, the code of 9F would be on the motherboard. Anyone else got this problem? Usually I can fix it by clearing my BIOS, and it doesnt happen THAT often. I went online and did a search and noticed people are getting lots of these problems. Anyone know exactly what the error code 9F means? Thank you.
 
I have this very board with the same problems as well. I see that you are using an Antec power supply.I had mine set up with a Antec True Power 550. The problem you are having is a compatiblillity issue with the Antec power supply. It has to do with something on low 12v current problems. This board and other 939 boards need really high output power supplys as well as more current capabillitys on the 12v rail. I have been in contact with Antec and they do know about the problem. You can also find it on the Abit forums. I had to send my True Power 550 back to Antec and they were able to fix the issue. I take my hat off to the Antec support group for their help, they were awesome. It's not that Antec makes a bad power supply, I think they make some of the best out there.(my number 2 choice) I got my power supply back and it workd fine. But due to the amount of stuff i am now running i have switched to Pc Power and coolings 510 Turbo Deluxe. Also looking at all the stuff you have going(and if you have lights and more fans and multi hdds ect....) I would highly recomend a power supply of atleast 500 watts and with higher output on the 12v then what you have now. Brand name in powersupply is very important. Right now I would say Pc power and cooling, Antec(thats had the corrective procedure), and OCZ to be the ones to look at. Hope this helps let me know if ther is more.

Cptn Insano
 
After looking at your sig again. You definitly do not have a large enough power supply for everything you have running.It needs to be atleast 500W and a higher 12V+ line output. Like around 28a to 34a.your 12V+ is MAX of 26 and i belive that that rating is actually closer to 20a. If you add up all that you have it well pushes the limts of that power supply. You need 500W continuous. My Pc power and cooling is 510W continuous and 650W peak with 34a on the 12V+ line.(and it is every bit of 34a on the 12V+) In your case I would recomend the Pc power and cooling or the OCZ PSU @ 500watt or better if you can. This should fix the Issue.

The Capt.
 
Captin Insano said:
After looking at your sig again. You definitly do not have a large enough power supply for everything you have running.It needs to be atleast 500W and a higher 12V+ line output. Like around 28a to 34a.your 12V+ is MAX of 26 and i belive that that rating is actually closer to 20a. If you add up all that you have it well pushes the limts of that power supply. You need 500W continuous. My Pc power and cooling is 510W continuous and 650W peak with 34a on the 12V+ line.(and it is every bit of 34a on the 12V+) In your case I would recomend the Pc power and cooling or the OCZ PSU @ 500watt or better if you can. This should fix the Issue.

The Capt.

He needs more amps, not more watts. 420 is enough for that, you just have to have enough current to match your needs. Make sure you don't mix and match the units ;) My truepower 480 has enough amps for that, and is only 480watts.
 
lopoetve said:
He needs more amps, not more watts. 420 is enough for that, you just have to have enough current to match your needs. Make sure you don't mix and match the units ;) My truepower 480 has enough amps for that, and is only 480watts.



As in my post if you read it it does state that he needs more amps. I stated that his curent supply is only a max of 24 to 26 amps and it being Antec it is only in reality about 20 to 22 amps. I stated that he needs to have closer to 28 to 30 amps. But AS PER MANUFACTURE RECOMENDATIONS for his Video card they recomend at least a 450 watt PSU and for his AMD 64 BIT/939 pin mobo cpu recomends at least 400Watts with what he has by MANUFACTURE recomendations would require more watts. Besides to get higher Amps on the 12V+ in and around 28 to 34 amps he will need to step up to a 500 watt PSU. (dont forget its H20 cooled so there is a pump, 2 HDDs, And if its moded with cold cathodes? needs more.) No such thing as too much when it comes to PSU Watts or amps. This is one area I see to many people skimp. If it were me I would go higher Watt as well as with higher amp rating but make sure it is a higher quality PSU like a PC power and cooling, OCZ or an updated Antec.(also rember that right now that the Abit Av8 has a KNOWN Antec compatibillity issue)

Captin Insano
 
So should I get a new PSU? I JUST got a new Antec 430, I figured it was the PSU going out. So far It has only happened twice to me since I got a new one. So what do I have to do to fix this problem? Should I get another PSU?
 
Captin Insano said:
As in my post if you read it it does state that he needs more amps. I stated that his curent supply is only a max of 24 to 26 amps and it being Antec it is only in reality about 20 to 22 amps. I stated that he needs to have closer to 28 to 30 amps. But AS PER MANUFACTURE RECOMENDATIONS for his Video card they recomend at least a 450 watt PSU and for his AMD 64 BIT/939 pin mobo cpu recomends at least 400Watts with what he has by MANUFACTURE recomendations would require more watts. Besides to get higher Amps on the 12V+ in and around 28 to 34 amps he will need to step up to a 500 watt PSU. (dont forget its H20 cooled so there is a pump, 2 HDDs, And if its moded with cold cathodes? needs more.) No such thing as too much when it comes to PSU Watts or amps. This is one area I see to many people skimp. If it were me I would go higher Watt as well as with higher amp rating but make sure it is a higher quality PSU like a PC power and cooling, OCZ or an updated Antec.(also rember that right now that the Abit Av8 has a KNOWN Antec compatibillity issue)

Captin Insano

You said that he needed 500 watts as well, which is untrue. You can get several 420's with the amp requirements he has, as well as several 480s. The 500w+ are exceptionally expensive, and unless you actually need the power output (watts), there is no reason to get them, unless you are intentionally buying in excess for later. But that is something he should decide ;) He needs one with a few more amps. He could get one with more of the rest, but he doesn't need it. If it were me I'd nab one at the price point, at about 480 watts, since after that the price jumps really rapidly.

And the manufacturer doesn't have a clue what their video card needs. They recommend way in excess so that the people who don't entirely know get the other requirements by "shotgun" effect. If you make them have 450 watts, chances are they'll have the needed amps.
 
lopoetve said:
You said that he needed 500 watts as well, which is untrue. You can get several 420's with the amp requirements he has, as well as several 480s. The 500w+ are exceptionally expensive, and unless you actually need the power output (watts), there is no reason to get them, unless you are intentionally buying in excess for later. But that is something he should decide ;) He needs one with a few more amps. He could get one with more of the rest, but he doesn't need it. If it were me I'd nab one at the price point, at about 480 watts, since after that the price jumps really rapidly.

And the manufacturer doesn't have a clue what their video card needs. They recommend way in excess so that the people who don't entirely know get the other requirements by "shotgun" effect. If you make them have 450 watts, chances are they'll have the needed amps.


Yes I did say that he needed 500W. Much better to have the overhead then to be right at the minimum. What if he decides to oc or add more mods and lighting or upgrade in the future. It's best to spend the money on something usable for a longer period then for short term.I doubt that if he has the setup he has spent all of his hard earned dollars on that the price point for the next up stuff will be any concern. Let alone an Antec True Power 550 is only $10 more then the 480W. Not much there.Also Looking at the rating of your 480 True power the rating of it is 480 Watts MAX power not continuous. The continuous duty is going to be lower closer to 375 to 400 watts max. It is the continuous duty that means the most. That is why going higher in watts is better as well or why a company like PC power and cooling make the best PSU on the block. Because they dont rate their unit by the peak but by the continuous supply. The same is said for most manufactures power rating in amps as well. They show you MAX PEAK output not continous. Most all machines run at the continuous ratings with ocasional spikes to the peak and therefore why more is better or deal with a manufacture that uses continuous ratings vs peak. But the other problem as I had stated is not just that Watts or amps but a compatibility issue is here and that includes all Antec stuff being used with the AV8. Thats why I would recomend something like the PC power and cooling or OCZ power supplys.Great brand names with better cooling and beter rates based off of the continuous ratings as well as much cleaner then most. Go with what I know works. The Antec 480TP has a maximum of 28 amps on the 12V+ and is in reality of closer to 25 amps max. Unfortunatly us debating about this or that will not solve the problem for him. He asked for a suggestion and here is the one I belive that will work. I belive that you know it will work as well. Let him figure out how much money he wants to spend. Thats whats great about this as even a hobby. Its all up to who wants what and when building something with all the goddies he allready has using a grade A psu will only make it that much better.

Captin Insano
 
Lopo, Captain Insano is right to a point on this. Besides you can get the Sparkle (Fortron)530 watters for like 75-80. I am sorry, but if I am paying a premium for my system (Don't we all as enthusiasts?) I am not skimping on the powersupply. 100 is VERY REASAONABLE to pay for a top PSU that won't burn out your system....
 
I got a 550w enermax PSU... 36A on the 12v rail. It was retail 160 but i got a 30 dollar discount so it came to 130. Pretty good deal i would say... It cleaned up my case REALLY nice too i absolutley love it. And I love the color of it, kinda like a metalic blue (maybe I woulld paint my case that color). Anyways thanks for all the help everyone!
 
oh, BTW does anyone know if there is a difference between the 3rd eye AV8 and the regular AV8?
 
operaman said:
Lopo, Captain Insano is right to a point on this. Besides you can get the Sparkle (Fortron)530 watters for like 75-80. I am sorry, but if I am paying a premium for my system (Don't we all as enthusiasts?) I am not skimping on the powersupply. 100 is VERY REASAONABLE to pay for a top PSU that won't burn out your system....

If you can get a 530 watt for that amount, then yes, get it. Last I had looked, they were closer to $150 :p

Been a while since I needed one, my 480's done fine for a good while. Sorry...
 
lopoetve said:
If you can get a 530 watt for that amount, then yes, get it. Last I had looked, they were closer to $150 :p

Been a while since I needed one, my 480's done fine for a good while. Sorry...


No Worries man. This is why we are all here. To help each other and make it more fun and interesting. The important part is that he who needs the help will get the info they need to fix their problem. lopoetve, I see you to are from Colorado. Been a while since i have been in your town. Nice area. I live just about 10 minutes north of Fort Collins. A little way from you still yet.

Captin Insano
 
Cool! Need to have a CO meet some time. I know that there are a lot of people froum around here, even a couple of the mods. :)
 
Well I still get the error, Just tryed to turn on my comp after i turned it off for the night. It turned on for a few secconds then shut off. This is even with the new PSU in. If I clear the BIOS then it will work, but I wanna see if i can find a way to get it to work all the time. Im thinking its the CPU/Mobo mix that is causing the problem or something (the 90nm cpu) Anyone know? Also is there a way to get the 90nm cpu to boot from a older BIOS? Any help on that would be greatly appreciated. Thank you.
 
There are issues with the 90nm cpu and any bios older than the latest.
If you don't have the latest, get it.
 
Back
Top