A8V Deluxe Memory Timing Question

[Gunter]

I just bought a new CPU & Board , and I was looking at the memory timings in CPUZ and they are not what they are supposed to be; im running 2x Kingston HyperX 512MB Modules PC-3200 2-3-2-6 timings, and CPUZ says the timings are 2-3-3-8. Ok, so I went into the BIOS to try to manually config the timings, and I get this;

TRC
TRFC
TRCD
TWR
TRWT
TRAS
TRP
TWCL

What are they, and what should I change?

 

[ashmedai]

The defaults are read off something called SPD, actually CPU-Z will report the SPD values on one tab and the current values on another.

2-3-2-6

Cas latency (TRC) 2
Ras to Cas delay (TRCD) 3
Ras Precharge (TRP) 2
Minimum Ras active time (TRAS) 6

Another important thing is the Command Per Clock setting, which should be 1T. 2T has about 10% worse latency so should be avoided if possible.

 

[Gunter]

Dont think I have the Option to change the Command Per Clock setting, is it called "2T Command?" If so, I can only Enable/Disable/Auto.

Also, what should my "Burst Length" be, 4 or 8 beats?