A8V constant reboots 8(

Xenozx

2[H]4U
Joined
Jun 16, 2004
Messages
2,127
OK i bought an asus a8v and a 3500+ a while ago. Its pretty much worked fine. One problem that was always there was

if the computer was off and you turned it on, it would turn on to nothing but a blanks screen. You then had to hit the reset button and then bootup would come up as normal.

problem 2 was that on every boot for the most part it would say overclocking failed. please press f1 to enter setup and fix. if you entered setup and saved and exited (didnt change a thing) it would boot into windows perfectly fine and you could prime 95 all night. If it passed this step it automatically changed the voltage on the processor to 1.8v+. and you had to reboot. if you restarted it would boot up normally no matter what this only happends on a fresh turn on.

anyway now im getting constant reboots. I was sitting here playing fable. I had my computer set to shut the monitor off every 30 minutes. So after about 30 minutes the monitor would go off and eventually it would pop on and reboot the machine. then it would go back into windows and the same thing would happend just a little bit sooner, then again even sooner. Anyway i decided all these could have been because of a beta bios that had the agp/pci lock which is why i used it. finally decided to go with the newest beta bios listed as august. After bios install i got checksum bad error message. went into bios and fixed everything back to normal. rebooted and fine. Then reboot out of no where in like 5 minutes. then it came up and said something about "speedfan could not be exectued because of something in the user.ini" anyway another reboot and booted back up no longer got that error and speedfan opened right up. i did change the voltage from 1.525 to 1.575 now ive been able to type this whole thing without a restart. im at 215x11 at 1.575v im usually at 230x11 at 1.650 without a problem, but im not gonna be able to go there anymore with this bios since it doesnt have the agp/pci lock.

anyway any idea why i would get reboots like this. Temp is not an issue, even at 1.8v i boot up at 42 degrees c. im at 1.575 now and its 32 degrees.

ok finished typing up to the text above and then another reboot only this time it was a Blue screen of death. basically talking about new hardware, etc...

any idea's?

no hardware has been changed in quite some time...
 
I've had similar problems with this board, I was under the impression it was something to do with my RAID setup though. Maybe in light of this I'll be upgrading to the MSI board - this one has been a lot of trouble for me. (in fact this whole computer has been a bitch to me, before this I had the Gigabyte one and ran into those corsair ram problems that everyone had, ended up swapping both the board and the ram and now I get this issue. This is supposed to be high end stuff - I expect stability and just haven't had the performance that I want at all.)
 
Ive had the performance but most definately have not had the stability 8(

Im pretty sure its the board too. the only problem is i have an aftermarket HSF on there, and i had to take off the old HSF holder, so i doubt i can do an RMA. I might have to look into a different board 8( I loved my old asus a7n8x deluxe no problems with it and still have it. This one just blew my mind. I have had problem after problem after problem. they havent been that serious but now i seriously am blaming them all on this board. RAID problems. boot up problems, restarts, overclocks etc.

can i still return an asus motherboard without that actual HSF holder via RMA without them saying "you have aftermarket parts on your motherboard! Warranty VOID!".

Is that what i should do? I have all the parts in this machine of a champion computer, but i find myself running into way to many problems.

is MSI a good board manu for the 939 socket to look at? do they have an agp/pci lock in non beta bios's?
 
OK ive been having some problems with my asus A8V motherboard as you can see above. Ive finally decided it might be time to buy a new MB all together. Ive been looking at the Nforce 3 chipset. I had an nforce 2 in my a7n8x mobo and i never had a problem with that machine. I like the fact that all nforce 3 have a working pci/agp lock. Performance seems to be another plus of the upgrade. I was reading an article on antech.com or something close to that which was rather confusing. they where comparing the via msi board the 754 msi board an even older msi board and the new nforce 3 msi board. anyway they all seem like they had the same damn name. They where talking crap about it not being a good overclocker. is this true?

with my asus a8v and when everything did work ok, i could do 230x11 at 1.65v on my 3500+. Am i gonna be able to get a comparable overclock on an MSI board?

also i have a aftermarket heatsink i would like to take from the asus board and put on the MSI board. its a SLK-948u. Is this gonna fit on this motherboard without touching anything? It for the most part looks just as cramped as my a8v that its currently on, just wondering if anyone else has done this?

also if i go go from the raid 0 setup i have no on my a8v and move it to the neo2 am i gonna have to reload the data and start from scratch or is it going to see the data just like an IDE drive?

if someone could answer the 3 questions above then i think i can make the right decision. again i appriciate you all for your help.
 
Back
Top