• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

a8n32 help please!

B

barcop

n00b
Joined
Dec 27, 2005
Messages
15
I updated the BIOS last night to 1103, and now my system won't POST with any video signal.

I've taken everything out, even the video card, reseated everything, and even just left the CPU and video card in, and still nothing.

I've cleared the clock settings, that didn't work either.

I tried putting the video card in the 2nd PCI-E slot, still nothing.



Any ideas?
 
If you can get BIOS 1009 on a floppy named 'A8N32SLI.ROM', then keep hitting 'Alt+F2' after powering up. This will blind-flash ('EZ-Flash') your BIOS back HOPEFULLY. Many are having trouble with 1103 (mostly RAM trouble).
 
You can try clearing the CMOS and then booting again. That should use "safe" bios settings. I had to do this when my flash to 1103 went sour.
 
Took a long time, but I found out that once you clear the CMOS, you need to boot with 1 stick of ram ONLY.


Up and running now, thanks for your help!
 
You must log in or register to reply here.
Back
Top