A7N8X suddenly dead?

Joined
Jul 10, 2004
Messages
5
I've been using my A7N8X-Deluxe successfully for about a year now. Up until Tuesday it was running great.

I woke up Tuesday and moved the mouse to bring it out of sleep mode. The image on the screen was totally scrambled and the computer was obviously frozen. So I rebooted thinking it was a one time thing. But 2 minutes into checking my email it hard locked again.

Ever since then, I can't boot up. I can only get a correct POST beep when I clear the CMOS. However, it still doesn't boot and if I reboot, I have to clear the CMOS again.

Does anyone have any ideas of what could be wrong? Could it be the power supply? Or the motherboard?
 
Sounds like the PS, since you get a beep. PS is cheaper to troubleshoot than the MB. Gotta start somewhere.
 
I am not surprised:rolleyes:

Funny, the A7N8X Deluxe I have pulled the same thing. I pinpointed the problem at the southbridge. Google 'Southbridge Overheating' and you will see lots more folks with the same issue. I would have freeze ups that required manual reboot after about 10-15 min of use after booting into Windows. I also thought the problem was the PSU, but it wasnt. Upon placing a fan (80 mm) to blow directly on the southbridge the problem stopped.

Since this, I will NEVER own another Asus board. I have had (4), thats right...(4) Asus boards drop out of commision in the last year. I am so fed up with Asus and their so called "Quality" and "Workmanship." There is a sticky for this board about troubleshooting and headaches for a reason.
 
I've had a few a7n8x-x boards and never had the first issue. But maybe I was one of the lucky ones that got a good couple boards.
 
something just to check for is the caps on your mobo ..if one or more are bulging ,then that is probably your problem ... I have an Epox 8rda (same era) that acted like that and it has a mess of bad caps on it...it finally just died , going to replace all the bad caps and see if it will still work tho :)
 
There are several things that will prevent a board from booting, but still giving a good POST beep.

Can you get into the BIOS? If so, that really limits the possible problems. If you can get into the BIOS, your memory is good, your motherboard is good, and your video card is good. If you can't get into the BIOS, your PS is half dead. Not uncommon for a machine that is left on 24/7 for a year. The only other possibility is a bad HD, but the BIOS would through up a "Insert System disk.." error if that was the case.

The random freeze thing sort of applies if your case is hot as hell, but that is not what you are describing as the problem.
 
Thank you all for your responses. Here are some of the things I've tried:

*replacing the CMOS battery because it would say "checksum error" and I was hoping that a little $3 battery could fix all my problems. It didn't...

*I took out the ram and the board gave out long beeps. I memtested the ram not to long ago, so I know that's ok.

*I know the processor is ok because I successfully booted into Knoppix, after this problem emerged, and did not experience any crashes.

*I noticed that when I boot up, the fan on my 5900XT makes a louder noise than usual and slows to a stop. I can tap it and then it will spin fast again. Does this mean the fan is failing or that there is too little power. I have an Antec 430W, but that's about 2 years old know I think. I've swapped my 5900 with an MX400 and the problem still exists so I don't think it's the video card.

*I can only get into the BIOS after clearing the CMOS. If I make changes and save, it will not boot on reboot and I must clear the CMOS again.

*I also checked the caps on the board and they all look ok to me, but maybe I'll have to take a much closer look.
 
Ooogly googly

I don't think the fan should stop on the 5900XT. Sure would be nice if you had a spare PS just to check things out. I hate dropping $50 on something I don't need. I can't remember if the graphics card can shut down the system because of a fan, but it can certainly shut it down if it is not initialized and recognized due to low power.

Still sort of points at the PS, unless it really is the MB going crazy. I don;t see that very often. Oh well, back to square one again. You're following the right path anyway.
 
MX2times said:
I am not surprised:rolleyes:

Funny, the A7N8X Deluxe I have pulled the same thing. I pinpointed the problem at the southbridge. Google 'Southbridge Overheating' and you will see lots more folks with the same issue. I would have freeze ups that required manual reboot after about 10-15 min of use after booting into Windows. I also thought the problem was the PSU, but it wasnt. Upon placing a fan (80 mm) to blow directly on the southbridge the problem stopped.

Since this, I will NEVER own another Asus board. I have had (4), thats right...(4) Asus boards drop out of commision in the last year. I am so fed up with Asus and their so called "Quality" and "Workmanship." There is a sticky for this board about troubleshooting and headaches for a reason.

That's pretty hilarious. I've had setup three computers with the A7N8X (non-Deluxe), and none of them have failed. Its been 2 years, and they're all going strong. Mine, however, does have a SB heatsink (since I'm the only one at 200FSB, the rest of them are running @ 166 with 2500+ Bartons).

I wonder perhaps if this is more of a Deluxe problem (with the MCP-T)...
Also, 2 of them have the reliable Antec 430 True Power, and mine has a Enermax 465W in there. Maybe its the MCP-T chip + weak PSU? I never get anything less than 350 now.
 
Thank you all for your help. I don't know if the problem has been fixed or is just being avoided somehow. I only have the hard drive plugged in (besides the necessities) and I can boot into the OS. I'm also using my MX400 and not my 5900XT. After I copy my necessary files over to my other computer I'll test with the 5900.

If it happens to be a PSU problem, would taking the cover off and blowing out the dust help? I've done this a couple times because it's dusty in here, but not in the last couple months. Could this be an overheating PSU or more likely would it just go bad?

Also, if I were to get a new PSU, are there any recommendations? Like I said above, it's currently an Antec 430 True Power. I don't believe I need more power, but would getting a larger wattage PSU help (efficiency-wise I mean)?

Thank you again for all your help and suggestions.
 
..and remember kids ...


..a clean power supply ... is a happy power supply :)
 
The A7N8X Southbridge gets hot, but if it was a big problem we would have heard about it, seeing as how popular those boards are.

You've tried all the rights things that I would suggest...since you can boot into Knoppix things must be okay to some extent...check the power supply?
 
TwistedAnimator said:
Also, if I were to get a new PSU, are there any recommendations? Like I said above, it's currently an Antec 430 True Power. I don't believe I need more power, but would getting a larger wattage PSU help (efficiency-wise I mean)?

Thank you again for all your help and suggestions.

I doubt you need more power than what you have. I'm getting by on an A64 rig similar to yours using a 350 watt Antec SmartPower with 21A on the +12. 350 watt and up with a good 20A or more on the +12 line will work. If you are running 6 case fans, 2 HDs, 2 optical storage, and a power hungry vid card, you'll be better off starting at the 400 watt 25A range.

Read the specs on the PS label. Power supplies are all over the map with ratings. Some of the 450 watt units provide less useful power than 300 watt power supplies. Newegg is a great place to PS shop, because they usually show you the PS label in the product pics.

I won't recommend a PS, because all of them are capable of crapping out. However, I can say that you get what you pay for.

Now if it turns out it isn't your PS, don't fret, because you'll have your first part for a future rig. Enjoy.
 
If you cannot keep your finger on the southbridge while the computer is running, then your southbridge is too hot. Another one of the signs is sound distortion if using the onboard audio

Look Here
 
Yep, this prob is not limited to just the A7N8X, but the entire NF2 series. Hence the NF7-S 2.0 being at the top of the list--course those boards were the best boards late'02 and early '03 so its no wonder they were being pushed to the limits (before the DFI's).

This is also why the Epox 8RDA3+ has a heatsink on both NB and SB (pretty nice touch).
 
OK, well I'm not able to boot into the OS any longer. This has led me to 2 possible solutions. 1) buy a new PSU or 2) but a new PSU and motherboard. Specifically, I'm looking at the Antec NeoPower 480 and the DFI NFII Ultra B. I realize there are cheaper replacements, but I haven't upgraded in a while so I need this for sanity.

So some last questions are in order. With only the CD plugged in and powered, I'm able to boot into Knoppix. Does this mean that the motherboard is still good? I cannot save BIOS settings at all though. When I do, I must clear the CMOS or it won't boot. Is that a power problem or a motherboard problem?
 
Back
Top