I have an asus v9480/tvd card that corrupted the drivers and knocked out my harddrive info. This system had been working fine for almost a year before the color bars showed up during boot up into windows 2000 pro.
Before sending the card to asus I purchased an aopen geforce2 mx 400 agp sdr 64mb card to use while mine was being repaired. This card works perfect in my system. I ended up sending the asus card back 3 times, the last time I sent it in they bench tested it overnight and stated that it was okay. I set the motherboard & card up on a piece of styrofoam outside the case and let it run for 2 days off and on with no problems except when my chair hit the box it was set up on and I got a blue dotted screen on the monitor, I had everything but 5 case fans plugged into the motherboard when that happened.
Asus told me to put electrical tape between the board and the standoffs and use insulated washers on the screws that connect the mb to the standoffs. I went to a computer store and they said that sounded sleezy, and gave me plastic standoffs and screws to use instead.
I put the system back together, but disconnected the vantec fan controller and only hooked up one of my smart fan 2 case fans, the temps were 31c case & 40c cpu, so the system was not overheating.
It operated great for 2 days and then when I booted it up this morning it got color bars again just after the windows icon appeared, but before it boots all the way into windows. I put the geforce2 card back into the same slot and it works perfect.
Any help would be appreciated,
Ron
Note: I have a 2500 barton chip and corsair memory, with an antec 1080 case with 430 true watts. 120 gb wd 8 mb buffer hd.
It seems like it has the problems after booting it when it has sat overnight.
Before sending the card to asus I purchased an aopen geforce2 mx 400 agp sdr 64mb card to use while mine was being repaired. This card works perfect in my system. I ended up sending the asus card back 3 times, the last time I sent it in they bench tested it overnight and stated that it was okay. I set the motherboard & card up on a piece of styrofoam outside the case and let it run for 2 days off and on with no problems except when my chair hit the box it was set up on and I got a blue dotted screen on the monitor, I had everything but 5 case fans plugged into the motherboard when that happened.
Asus told me to put electrical tape between the board and the standoffs and use insulated washers on the screws that connect the mb to the standoffs. I went to a computer store and they said that sounded sleezy, and gave me plastic standoffs and screws to use instead.
I put the system back together, but disconnected the vantec fan controller and only hooked up one of my smart fan 2 case fans, the temps were 31c case & 40c cpu, so the system was not overheating.
It operated great for 2 days and then when I booted it up this morning it got color bars again just after the windows icon appeared, but before it boots all the way into windows. I put the geforce2 card back into the same slot and it works perfect.
Any help would be appreciated,
Ron
Note: I have a 2500 barton chip and corsair memory, with an antec 1080 case with 430 true watts. 120 gb wd 8 mb buffer hd.
It seems like it has the problems after booting it when it has sat overnight.