a7n8x barton2500 OC

B

badbadtz560

Limp Gawd
Joined
Apr 20, 2004
Messages
440
Has anyone overclocked this thing to 200 or above ? When I was OC-ing with my mushkin 2-2-2 ram, I couldn't get to 200 while OC-ing w/o pumpin the voltage really high. If anyone's OC-ed it past 200, could u tell me what kinda settings you put? like multiplier, fsb, etc.? Oh, I think it might be an a7n8x deluxe.. but I forget :D

oh.. I have a blue zalman NB cooler on it and a thermalright 947 U on it. W/o Ocing, it's running b/w 40 and 50 Celcius
 
Im doing 200x11 @ 1.74v with a thermalright BLK-800 and 80mm ADDA fan mounted with AS 5.

In sync with a gig of corsair value select pc3200, 2.5-3-3-7 @ 2.7v

Same setup. Barton 2500+ (running as a 3200) on an Asus A7N8X Deluxe.
 
The highest fsb I got on my mobile 2500 was 190 x 12.5 for 2375 w/ a7n8x deluxe, first rev. The mobo seriously limited that chip. I put it my buddys dfi lan party and it did 233 x 11
 
I have my Barton 2500+ at 220x11 for 2420 MHz on my A7N8X-X using only one 256MB stick of generic RAM. The stick of RAM is running loose timings though, 2.5-4-4-8. I've tried 227x11 for an even 2500MHz at the same timings, but it didn't make it to Windows. 225x11 might work, but I'd rather not push it since I most likely wouldn't see a realistic performance gain over 220x11.
 
hmm.. ok i've gotten it to run at 195x11 w/ 1.775 V
2-2-2 at 2.7v
mine's a slk 947u i tihnk? w/ a panaflo L on it hehe. mounted w/ as5

anybody else OC theirs? i'm tryin to get mine to run at 200x11.. but i'm afraid to up the voltage on my mushkin =\
 
mine's a 2.0 too I believe.. for some reason i jsut can't OC it - 195 froze up real fast when i started runnin prime95.. actually.. 187x11 failed too...i even have that blue zalman cooler on the NB and my cpu heatsink is prety good.. I think at stock speeds, it runnin at 40 deg idle isn't bad at all either.. considering that i'm using a panaflo L 80mm on it.
 
You must log in or register to reply here.
Back
Top