• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

a7n8x barton2500 OC

B

badbadtz560

Limp Gawd
Joined
Apr 20, 2004
Messages
440
Has anyone overclocked this thing to 200 or above ? When I was OC-ing with my mushkin 2-2-2 ram, I couldn't get to 200 while OC-ing w/o pumpin the voltage really high. If anyone's OC-ed it past 200, could u tell me what kinda settings you put? like multiplier, fsb, etc.? Oh, I think it might be an a7n8x deluxe.. but I forget :D

oh.. I have a blue zalman NB cooler on it and a thermalright 947 U on it. W/o Ocing, it's running b/w 40 and 50 Celcius
 
Im doing 200x11 @ 1.74v with a thermalright BLK-800 and 80mm ADDA fan mounted with AS 5.

In sync with a gig of corsair value select pc3200, 2.5-3-3-7 @ 2.7v

Same setup. Barton 2500+ (running as a 3200) on an Asus A7N8X Deluxe.
 
The highest fsb I got on my mobile 2500 was 190 x 12.5 for 2375 w/ a7n8x deluxe, first rev. The mobo seriously limited that chip. I put it my buddys dfi lan party and it did 233 x 11
 
I have my Barton 2500+ at 220x11 for 2420 MHz on my A7N8X-X using only one 256MB stick of generic RAM. The stick of RAM is running loose timings though, 2.5-4-4-8. I've tried 227x11 for an even 2500MHz at the same timings, but it didn't make it to Windows. 225x11 might work, but I'd rather not push it since I most likely wouldn't see a realistic performance gain over 220x11.
 
hmm.. ok i've gotten it to run at 195x11 w/ 1.775 V
2-2-2 at 2.7v
mine's a slk 947u i tihnk? w/ a panaflo L on it hehe. mounted w/ as5

anybody else OC theirs? i'm tryin to get mine to run at 200x11.. but i'm afraid to up the voltage on my mushkin =\
 
mine's a 2.0 too I believe.. for some reason i jsut can't OC it - 195 froze up real fast when i started runnin prime95.. actually.. 187x11 failed too...i even have that blue zalman cooler on the NB and my cpu heatsink is prety good.. I think at stock speeds, it runnin at 40 deg idle isn't bad at all either.. considering that i'm using a panaflo L 80mm on it.
 
You must log in or register to reply here.
Back
Top