A network cable is unplugged..........

pigwalk

[H]F Junkie
Joined
Dec 14, 2004
Messages
8,396
But damn you Windows, it is! Just got a Linksys BEFSR41 to not have to daisy chain one PC to another anymore. My dsl modem is a zyxel 645 and I'm using Embarq's service. Machine number 1, using my K8N Neo4 Plat/SLI connects fine through the router. Machine 2, using either the onboard Biostar M7VIT Pro ethernet, or a PCI Realtek RTL8139 connects fine directly to the dsl modem, but when connected to the router, on any of the 4 port gives me a ""A network cable is unplugged" error. On either adapter, with or without machine 1 connected. The router is set to give out 50 addresses through DHCP, Machine 2 is set to DHCP, but no go. It's as if the router just ignored that the cable is connected to it. Any clues?
 
I would say a bad port on the router itself. If I read the OP right. It is late and I have had a few beers.
 
so i am going to take a wild guess here and say if you are connecting to the dsl modem just fine... try using a standard patch cable instead of a crossover cable
 
Tried both a standard patch, and a crossover, neither time does it recognize the cable plugged in. Also, the machine that does connect, connects fine through all 4 ports. Going to try a repair install tomorrow, or maybe booting through a Linux LiveCD to see if it's a windows specific problem.
 
Back
Top