A good OC???

[trugbilddrachen]

Still messing around with OCing and getting the hang of it.

Since my Abit Faltal1ty finished itself off and moving on to my first Asus let alone the Crosshair.


My x2 3600+ Brisy is sitting at 2.73 (287 x 9.5) at stock voltages. Ram is sitting at 904 (running at the 667 divider) stock volts..

I have OCZ plat 2gb rev 1 DDR2 800. It has the 2.1v instead of Rev2 at 1.8v.

This OC is stable as can be.. . but one MHz more even with the ram at a 400 divider and voltage bumped nada...

Cpu idle is 35 and 46 at load.

So on air is this it? was this a decent OC?
Could the ram just be a average set and thats it?
Should I buy the rev2 and sell the rev1's?

The bios is a little out of date... Their site is slow so i am still working on it.

Thanks

 

[trugbilddrachen]

Ok... messed around with some more...


CPu is at 2.85 DDR is at 808 5-5-5-15 t2

The problem i am having is that Asus bios shows 1.36v
CPUID shows 1.48v??? So which is right???

CPU 38-42 according to asus probe...

Still need to stress test... but i think this is as far as this one goes.