9850 anyone?

Jakalwarrior

2[H]4U
Joined
Aug 6, 2005
Messages
3,189
Since the guy on XS bought a retail one and got 3.4 everyone over there seems to have sprung for one. Anyone over here buy one? im eager to see if that kind of result is common place. Also wondering how the lower end chips do :D 9550 is more in my bracket.
 
You'll see a downgrade in performance most likely if you go for the 9550. I don' think it overclocks that well. What allowed the 9850 to do so well is the fact it has a unlocked multi. For 50 bucks more I would just get that and overclock it or wait for the 45nm die shrink to come out.
 
I'm looking at the 9750 to hold me over till 45nm hits mainstream, I'm not much of an Overclocker so 2.4 should be a nice improvement to my stock Opty 170. Are the 45nm going to be drop in replacements for the 65NM quads.
 
I think the 65nm are actually going to continue production. By the looks of things the 45nm if meant more for higher clocked desktop processors and probably better server processors. Probably once the 45nm has good enough production levels it'll phase out the 65nm. I have to say AMD did move pretty quickly from the 65nm to the 45nm. Reminds me of the 2900XT being shrunken into the 3870.
 
I just have to be certain on this.

If I replace my 6000+ with 9850 on my M3A32 board, do i need to reinstall the OS ?
 
Wehn I went from a 4200+ to a 9500 I didnt have to reinstall my OS. However Windows picked up on the change and required me to reactivate Windows. Sort of get tired telling those reps that I only have the damn software on one computer. I would reccommend that you reinstall your OS as I found that the computer just worked better after the reinstall.
 
I think a computer always works better after re-install. I just dont wanna reinstall.
 
I hear you, seems like I am doing it about once a month. Thank god for Ghost!
 
You just unistall X2 Dual Core Optimization driver..if you had it installed. Also make shure your already on the Best BIOS for Phenom and your Mobo!

Then reboot into Bios set OPTIMIZED Defaults.....reboot turn off and install new chip....Start up into Windows with all default settings and install AMD Phenom driver..You shouldnt have any other changes needed....

I ve swapped my Phenom and LE 1640 and several X2's in My TA770 with no problems what so ever..

The only thing in Windows that has giving me a problem is the crummy ATI 8.2 cat driver...It only acts up when Oveclocking Phenom and 3870x2...Bios related problem..


WARNING...Make shure your Mobo's FET's can Handle the 9850+ chips.....The TA/770 says its rated for 6000+,, which mine indeed runs fine@3.5ghz even with a 3870x2 taxing the PCi-E...

I say this Beacuase Anandtech was able to cook several Mobos . Several manufactures used FET's that are in no way rated to Handle a 95watt chip and still used them anyway...If you run into this problem while using the Rated chip the Mobo can handle "Send it in ASAP"...Yes my TA/770 has Different rated FET's and many other Mobos do too...But i urge any one with a new Mobo to check with your Manufacture for reashurance...

arg..arg..

Biostar support said they are doing testing with phenom 9850 and have not ran into any problems and I asked specifically if it would work with phenom 9850 with latest bios and they emailed back yes. Biostar tech support did not mention overclocking though which is what I intend to do.

arg..arg..


More info Here: Please ADD any Mobo you know of that dosnt handle 125watt CPU's its aAMD and INTEL FET mobo thing too not just AMD.

http://www.rebelshavenforum.com/sis-bin/ultimatebb.cgi?ubb=get_topic;f=53;t=000553
 
I personally always reinstall my OS whenever I change out motherboards, CPUs, or HDDs. Then again, I reformat at least monthly hehe.
 
Ive already burnt an MSI 790X board with a lowly X2 4000+. Im hoping my Asus M3A can handle a phenom with the voltage cranked.
 
Ive already burnt an MSI 790X board with a lowly X2 4000+. Im hoping my Asus M3A can handle a phenom with the voltage cranked.

I did the same thing with my MSI 790X board I was using a 5200+. I also now have the M3A and from what I read it will not handle the 125watt Proc. I was hoping too. They are saying it needs to have more than 4-phase power.
 
I'm looking at the 9750 to hold me over till 45nm hits mainstream, I'm not much of an Overclocker so 2.4 should be a nice improvement to my stock Opty 170. Are the 45nm going to be drop in replacements for the 65NM quads.

From what I have read, AMD will be changing the memory controller from DDR2 to DDR3 and this will require that they goto a new socket. So I don't think it will be a dropin replacement. When they went DDR to DDR2 they changed sockets.
 
From what I have read, AMD will be changing the memory controller from DDR2 to DDR3 and this will require that they goto a new socket. So I don't think it will be a dropin replacement. When they went DDR to DDR2 they changed sockets.

No, if the roadmaps stay true, the 45nm "Deneb" will have AM2+ and AM3 compatiblity. So it *should* be a drop in if you have an AM2+ motherboard.
 
i think current K10s already have the ddr3 controller in the die, but disabled, so there will be a quick transition/compatibility to AM3 when DDR3 prices comes down to where DDR2 are.
i ordered my 9850BE and will pick it up on Tues/Wednesday. HOpefully, some good OCs
 
i think current K10s already have the ddr3 controller in the die, but disabled, so there will be a quick transition/compatibility to AM3 when DDR3 prices comes down to where DDR2 are.
i ordered my 9850BE and will pick it up on Tues/Wednesday. HOpefully, some good OCs

odered mine. did you get yours yet ?
 
Back
Top