9800 XT FREEZING while playing graphic-intensive games.

Joined
Apr 8, 2005
Messages
20
Intel P4 3.0 800 FSB
1.5 GB DDR 3200
Windows XP Home
ATI Radeon 9800 XT (65 C idle, 70 C active) - recently upgraded from a 9600 SE
SOYO Dragon Platinum v 1.0
PSU Rosewill 350

--

Symptoms:

After about 15-30 minutes of playing graphics-intensive games (GuildWars, BF2, CS:S) my comp will just freeze - no sound, no reaction from the keyboard/mouse - and I'll need to reboot manually.

What I've done:

  • Installed an ATI Silencer 3 HSF
  • Re-installed the Catylist 5.6 driver (I didn't go through all the steps listed in the forum FAQ, though)
  • Tested with 5 seperate RAM sticks (1 GB at a time)

--

I'm at my wits-end, and I'm about to send the fuckin' card back.

What's more annoying is that my ATI 9600 SE ran the games just fine :mad:

I read somewhere that a possible solution would be to up the AGP voltage from 1.5V to 1.7V. My BIOS, however, doesn't support this function. If there is a consensus on this solution, I'll work on upgrading it.

PLEASE HELP
 
Exactly which Soyo Dragon motherboard do you have? There might be a bios release that adds this feature. You shouldn't have to go to 1.7v to stabilize it, 1.6v in most cases is enough. Is anything in your system overclocked?
 
Aaron_ATX said:
do that first and then come back.
Yeah.

acascianelli said:
Exactly which Soyo Dragon motherboard do you have? There might be a bios release that adds this feature. You shouldn't have to go to 1.7v to stabilize it, 1.6v in most cases is enough. Is anything in your system overclocked?
Mobo = SY-P4I865PE Plus DRAGON 2 v1.0

There is nothing overclocked in my system. The ATI Overdrive(tm) feature is disabled.
 
I have that same type of card, but I use FireGL drivers and it would freeze every time I try to play BF2 on High and on Medium settings. I solve my freezing problems by playing most of the games in very low settings.
 
mooooooon said:
I have that same type of card, but I use FireGL drivers and it would freeze every time I try to play BF2 on High and on Medium settings. I solve my freezing problems by playing most of the games in very low settings.
I moved all my settings to the lowest possible, and encountered the same issues (and I mean LOWEST possible settings).
 
Okay, I've followed all the steps listed in the FAQ to uninstall my old drivers.

Instead of just "ATI" on the "Driver Cleaner", I selected all ATI-related options.

I did notice one thing, though - after completely uninstalling all ATI components, then using "Driver Cleaner" in Safe Mode, and restarting normally, XP automatically installs some older drivers upon starting. Then when I go into Add/Remove, I see that there is an ATI Display Driver sitting there.

I tried stopping the Plug 'N Play service before I restart, but this just caused some havoc in my system.

I tried installing the Catylist 5.6 even though XP automatically installed some older driver, and the problem remained the same.

Does anyone know a way to stop XP from automatically installing the ATI drivers upon reboot??
 
On the ATI folder there should be an executable that cleans all ATI cat related files. I forgot the name because it's been awhile since I switched to Nvidia. Try that and that should avoid installing the old Cat drivers.
 
Dingleberry said:
I'm at my wits-end, and I'm about to send the fuckin' card back.
I don't think that you will be able to considering that you put a Silencer on your card.
 
Dingleberry said:
I moved all my settings to the lowest possible, and encountered the same issues (and I mean LOWEST possible settings).


Just FYI, what you're describing is a classic software/driver fuck up, so stop blaming your hardware. 3 times out of a 4 its user error. Meaning you. Back up what you want, do a complete reformat, install fresh copies of everything and be done with it. Thats what i'd do.
 
Trading out the card is my very last option.

I agree with you that the issue is software/driver related.

However, the fact that the problem is happening throughout all my games would probably concentrate the issue on the driver. If there was some sort of evidence pointing to reformatting (this will probably be my last resort anyway), I would gladly go forward with it.

Dingleberry said:
Okay, I've followed all the steps listed in the FAQ to uninstall my old drivers.

Instead of just "ATI" on the "Driver Cleaner", I selected all ATI-related options.

I did notice one thing, though - after completely uninstalling all ATI components, then using "Driver Cleaner" in Safe Mode, and restarting normally, XP automatically installs some older drivers upon starting. Then when I go into Add/Remove, I see that there is an ATI Display Driver sitting there.

I tried stopping the Plug 'N Play service before I restart, but this just caused some havoc in my system.

I tried installing the Catylist 5.6 even though XP automatically installed some older driver, and the problem remained the same.

Does anyone know a way to stop XP from automatically installing the ATI drivers upon reboot??
That's what I've done so far with the driver.

Are you saying that there is nothing more to be done for it? If so, I guess I'll go ahead and start backing my shit up.

Mr Mean said:
On the ATI folder there should be an executable that cleans all ATI cat related files. I forgot the name because it's been awhile since I switched to Nvidia. Try that and that should avoid installing the old Cat drivers.
I found the AtiCimUn.exe file in the "ATI" folder, and ran it.

However, XP still has a copy of the older driver hiding somewhere on the system.
 
I cringe when someone has gone through all those steps (safe mode, ATI Cleaner) to remove all those ATI registry residues when they upgrading to a newer Catalyst. The standard "ATI Software Uninstall Utility" is enough. It's designed to do just that. I know it will not remove all the registry entries, but you don't have to anyways.

Important, don't try to remove the other two things, "ATI Display Driver" and ATI Catalyst Control Center". It will cause problems. Just use "ATI Software Uninstall Utility" once for all.

And yes, when reboot don't let the WIndows install the driver for you.

Formating will solve all the software-related problems and might actually be faster than trying to troble shoot the problems. If formating does not solve it, then it's a hardware issue.
 
The reason your PC keeps installing an old version of the CAT's is because your online when you reboot. Unplug your modem and do the uninstall process, then only plug your modem back in when you have the drivers you want freshly installed on your machine.

Windows XP will use windows update to download and install old drivers while your machine is booting up. I know this because i have had to do this many times.

Try it, youll see.
 
Actually, now that I think about it, I had the exact same problem back when I first bought my 9600XT. Whenver I would play a DX9 game (Halo, in my case) my system would completely freeze up and I would be forced to do a hard restart.

Turning the AGP bus down to 4x and turning fast-write off fixed the problem.

It's possible that you could be having the same problem considering that the 9600XT and the 9800XT are based on the same architecture. It's a long shot, but you don't have anything to loose by trying it.
 
CaNNoN said:
The reason your PC keeps installing an old version of the CAT's is because your online when you reboot.
This worked, thanks.

ATI recommends SP2 on their site, so I installed it. I re-installed BF2, and set my AGP bus to 4X, and fast-write OFF (I tried at normal 8X/fast-write ON, as well).

No luck.

I'll be reformatting at the end of the day unless I get some other advice.

Ty.
 
Dingleberry said:
I found the AtiCimUn.exe file in the "ATI" folder, and ran it.

However, XP still has a copy of the older driver hiding somewhere on the system.
Do a clean OS format.
 
sp2 is very buggy...i couldnt do anything after i had a sp2 update i had to re-install windows.......
 
the 350w shitwell psu is the culprit

9800xt = about twice power of 9600se, a little more perhaps.

350w generic psu is a bad idea in any system, let alone one running a 9800xt.
 
GVX said:
It's possible that you could be having the same problem considering that the 9600XT and the 9800XT are based on the same architecture. It's a long shot, but you don't have anything to loose by trying it.

That is 110% incorrect. The 9600 was based on the smaller micron process and was an entire new core. In fact, the 9800xt was based on the pcb of the 9800 pro, which in turn was based on the 9700 which was the new generation. The 9500 was also on a similar pcb with the same core.

The 9600's were unmoddable into 9800's, because they were created void of the other 4 pipes.

There is a reason why 9600's overclocked to 520mhz and xt's were barely ever aboev 460 on stock cooling. It's a different core, the n9800xt is much more efficient per clock cycle due to the extra pipes.
The two cards are as different as you can possibly get while remianing a video card.
 
computerpro3 said:
the 350w shitwell psu is the culprit

9800xt = about twice power of 9600se, a little more perhaps.

350w generic psu is a bad idea in any system, let alone one running a 9800xt.
Do you have a suggestion for a PSU?
 
go read my sticky in the psu forum, or just shoot me a pm with how much you can spend and I'll gather some options up
 
computerpro3 said:
go read my sticky in the psu forum, or just shoot me a pm with how much you can spend and I'll gather some options up
Price is pretty flexible.

$50-80.
 
computerpro3 said:
go read my sticky in the psu forum, or just shoot me a pm with how much you can spend and I'll gather some options up
Oh, nice post :cool:

Anything new out in the last month and a half, though?
 
Dingleberry said:
Oh, nice post :cool:

Anything new out in the last month and a half, though?

My guess is you have a crappy PSU and need something a bit more stable (i.e. your other one is cooking and going flakey). I have a Fortron 350 (1 month old) that i'm unloading that i'll ship fairly cheap. A 350W should be more than enough for your system. I'd even be willing to send it to you for the cost of shiping...if it works then send me the diff.

-tReP
 
I have a 9800XT, I did not experience freezing, but I experienced graphical issues, mainly ground textures being randomly replaced with black textures, I expeirenced this issue in BF2, certain maps in UT2004 and the FEAR beta, I tried using different versions of the Cat drivers and that did nothing, thought it was heat related, but the temps were fine, I also tried wiping the hard drive and doing a fresh install of everything and that did not work, so after all these things failed to work, I thought I was screwed and was prepared for the possibilty of upgrading, but then I decided to look in the BIOS and check stuff out.

I was looking through my BIOS and I changed 3 things and it solved my problem, I do not know exactly which one did it, but I have had no further problems since.

I disabled fast writes, I changed the AGP Aperture size to match my card, and I upped the AGP Voltage from 1.5 to 1.6
 
Trepidati0n said:
My guess is you have a crappy PSU and need something a bit more stable (i.e. your other one is cooking and going flakey). I have a Fortron 350 (1 month old) that i'm unloading that i'll ship fairly cheap. A 350W should be more than enough for your system. I'd even be willing to send it to you for the cost of shiping...if it works then send me the diff.

-tReP

That sounds like an excellent deal, I would do that if I were you. A fortron 350 is a LOT better than a rosewell. Even if it doenst solve your problems yuo will be able to sleep a lot better at night and all your componets will have cleaner power, which means longer life, in some cases cooler running and higher overclocking. I know I gained 150mhz on CPU by going from antec to pc power and cooling, obviosuly that was a drastic case but I can't stress the importance of a good psu enough.
 
computerpro3 said:
That sounds like an excellent deal, I would do that if I were you. A fortron 350 is a LOT better than a rosewell. Even if it doenst solve your problems yuo will be able to sleep a lot better at night and all your componets will have cleaner power, which means longer life, in some cases cooler running and higher overclocking. I know I gained 150mhz on CPU by going from antec to pc power and cooling, obviosuly that was a drastic case but I can't stress the importance of a good psu enough.
Okay, I picked up a 500W Antec today at Fry's.

I installed it, and I'm still freezing.

First time I loaded BF2, it kicked me back to desktop while it was loading a map, active temp was 72 C.

Second time, it froze at the server selection screen.

:mad:
 
GPU is at 72 Celsius before the game has even finished loading?

My GF5900 idles at 38C and can't crack 60 under load.
My pair of SLI'ed 6800 Ultras are stifled for air (presently) and idle at 55C and 72 is about the highest I've seen them with HL2, Farcry or D3 running with all the bells-and-whistles.

I'm not very familiar with ATI cards, particularily the 9800 series, but isn't over 160F a little hotter than you should be starting out before the game has even switched into 3D mode?
 
I have a 9800XT and play BF2 and posted in your other thread, so I am going to say the same thing in case if you have not tried it yet.

Try disabling fast writes, and match AGP apeture size to the amount of memory on your card, I would also mention adjusting the AGP voltage but you stated that you don't have the option to adjust, maybe a BIOS update will fix that.
 
I dunno, it actually sounds like a heat issue to me, especially since it happens within the same time frame every time. For having a Arctic Silencer 3 on it, the temps you posted in your first post are really high. 60C idle is pretty insane- I'm hitting 51C idle on a X800XL in 95F weather. Are you sure you seated that thing correctly? If it's not making good contact with the core, you'll have heat problems with the card. Do you have unusually high ambient temperatures (it being summer and all)? I don't remember exactly if you had to remove the shim around the GPU core on the 9800XT to make the Arctic Silencers fit, but it might be something worth looking into on the forum.
 
Thank you for all the replies!

Well, after serious testing/driver cleaning/re-seating the cooler/re-applying thermal goo, I started getting artifacting when I loaded BF2.

I'm returning the card, and have since moved back to my trusty 9600 SE.

Thanks again :)

Ozymandias said:
I dunno, it actually sounds like a heat issue to me, especially since it happens within the same time frame every time. For having a Arctic Silencer 3 on it, the temps you posted in your first post are really high. 60C idle is pretty insane- I'm hitting 51C idle Are you sure you seated that thing correctly? If it's not making good contact with the core, you'll have heat problems with the card. Do you have unusually high ambient temperatures (it being summer and all)? I don't remember exactly if you had to remove the shim around the GPU core on the 9800XT to make the Arctic Silencers fit, but it might be something worth looking into on the forum.
The temperatures in my apartment get up over 89 F sometimes.

I moved my entire system over near the kitchen window (the coolest location at the spot), and did my last bit of testing there.
 
Back
Top