9800 XT and Battlefield 2.

Joined
Apr 8, 2005
Messages
20
I have a rather large thread in the Video Card forum, and I thought I'd try a different approach here.

Is there anyone who has a 9800 XT (not a 9800 pro OC'd) installed, and running BF2 successfully? I'd like to ask you about your ATI Control Panel settings, in-game graphic settings, et cetera...

My issue is described here, and I apologize for the cross-linking, but I'm desperate.

Also, has anyone experienced Omega drivers? Are they worth a shot?
 
My flashed XT died before I could get my hands on BF2, so I can't help you much there; however, could you post the temperatures of your system before and as you play the game? I'm thinking this is a heat issue.
 
Ok... the temperature seems to be within the acceptable range. Why don't you try driver cleaning and installing Omega?
 
Dingleberry said:
Also, has anyone experienced Omega drivers? Are they worth a shot?



They were all I used on my 9500, cause they enabled the softmod giving me four extra pipes. They were excellent, give them a try. Though I agree with the people in your other thread that it may be your PSU.
 
60-65c idle is way too fucking high, if I were you, I'd order Zalman VF700Cu on 'Egg right away.
 
Mr. Stryker said:
60-65c idle is way too fucking high, if I were you, I'd order Zalman VF700Cu on 'Egg right away.

Oh... really? Hmm... maybe that's why mine blew out... haha.
 
ok, Im sorry if this is a stupid question... but how do you know what your temp is? I remember on my 9600xt in the driver control panel there was a temp display, but I dont have one now on either of my 2 9800's or my x800pro.

dan
 
9800xt and BF2 running successfully here. control panel set to balanced and oc turned on, 1280 x whatever, all game settings on high or med if i recall correctly
 
dmize said:
ok, Im sorry if this is a stupid question... but how do you know what your temp is? I remember on my 9600xt in the driver control panel there was a temp display, but I dont have one now on either of my 2 9800's or my x800pro.

dan
the XT cards usually have a built in temp sensor... the pro versions don't always.

my 9800PRO 128 that I've bios modded to XT doesn't have it while from what I've read most of the R360 cored 256mb Pros do... depends on the model of card from what I understand
 
I've got a 9800XT (Regular ATi, not a Saphire or anything). Running Catalyst 5.7's. It can handle the 'high' settings at 1024x768, but for multiplayer I've been using the default 'medium' settings at 800x600 for better framerates. All my ATi display settings are default, with overdrive off.

Your temperatures are normal, for a stock heatsink anyway. I would expect them to be lower with that cooler. Did you try out the card before you installed that ATI Silencer? I slowly killed my old 9800 Pro 256mb when I went to watercooling, and I'm still not totally sure what happened to it.

I only glanced through the other thread, but their suggestions seem right. It could be your power supply (I've got a 450w), and make sure you have a clean driver install. You might try reseating that cooler, too.
Interestingly, my brother's P4 3.2/X800XL (PCI-E) system and Battlefield 2 don't get along, showing the same symptoms as your computer, but it's fine in other games.
 
My friend is playing Battlefield 2 demo absolutely maxed at 1280x1024 and it runs great on a dell xps gen. 2 (BBAti 9800xt of course), sorry if you don't care about the demo though. Catalyst 5.6
 
Mr. Stryker said:
60-65c idle is way too fucking high, if I were you, I'd order Zalman VF700Cu on 'Egg right away.

You have no idea what you are talking about, I suggest you shutup and read up on NORMAL radeon 9800 series temps. Most are 60-65C.

there is a difference between your CPU's safe temp range and your GPU's.
 
I posted twice in your other thread but I will mention the same things again if you have not tried these things yet.

Try disabling fast writes, match the AGP apeture to your card, and maybe a bios update will open the option to adjust the AGP voltage.
 
Dingleberry said:
Idle is between 60-65 C; active can reach as high as 75 C.

That is quite high for idle. Try using ATItool to see how high your temps actually go in real time.


Mr. Stryker said:
60-65c idle is way too fucking high, if I were you, I'd order Zalman VF700Cu on 'Egg right away.

I second this suggestion. Here's a link to my Zalman VF-700Cu thread with lots of happy Zalman customers posting their results.

Good luck. :)
 
Zalmans are always good but that temp is fine for a gpu.

I suggest you edit your driver name to something other than 9800xt, perhaps 9800pro?

I have a 9800se->pro and it works just fine with BF2 demo.

~Adam
 
Thank you for all the replies!

Well, after serious testing/driver cleaning/re-seating the cooler/re-applying thermal goo, I started getting artifacting when I loaded BF2.

I'm returning the card, and have since moved back to my trusty 9600 SE.

Thanks again :)
 
Back
Top