• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

9800 Pro help!!

MrFace

2[H]4U
Joined
Feb 23, 2003
Messages
2,716
Is there a shim on the stock cooler? I want to apply Arctic Silver, but I dont know if the stock cooler has a shim or not
 
MrFace said:
Is there a shim on the stock cooler? I want to apply Arctic Silver, but I dont know if the stock cooler has a shim or not

it does.. but you shoudl be fine putting the AS5
 
RancidWAnnaRIot said:
it does.. but you shoudl be fine putting the AS5

But wouldn't removing the shim leave a space between the GPU and heat sink?
 
MrFace said:
But wouldn't removing the shim leave a space between the GPU and heat sink?
Sometimes. Some 9800p cores are actually higher than the shim. Mine wasnt, so I just ground off the base of the heatsink, leaving a square to contact the GPU. I killed my first 9800pro by removing the shim, I swore I would never do it again :D
 
Ok I just got done putting AS Ceramique on...let's hope i didn't ruin anything :D
 
wait wait wait... you were planning on removing the shim???? cuase don't!!! you might crush the GPU!!! don't remove the shim!
 
RancidWAnnaRIot said:
wait wait wait... you were planning on removing the shim???? cuase don't!!! you might crush the GPU!!! don't remove the shim!

No no no, I thought he shim was ON the heatsink, that's how a realy shim typically works. A real shim fills in a space bettwen two objects...I thought the shim was on the core.
 
Back
Top