965p-ds3 rebooting

JimThrawn

n00b
Joined
Apr 29, 2008
Messages
1
I know this isn't a bleeding edge comp anymore, but I was hoping someone here might have a suggestion of two. First off the specs:

Intel e6300
Gigabyte 965p-ds3
2GB Corsair XMS6400
Nvidia 7950GT
Zalman 9500
Audigy 2ZS (Not connected currently)
Seagate 320GB HDD
DVD burner and dvd player

I booted into the BIOS, changed my FSB from 266 to 300, set the memory multiplier to 2.00, and set my RAM to 4-4-4-12 timings (as those are the recommended timings for that memory). I did NOT however up the mem voltage, big mistake, I know. I saved and rebooted...and it didn't do anything. Just sat there with nothing on screen for about 10seconds. Then it automatically shut down, came back on for 2-3 seconds, and shut down again; it will continue indefinitely unless I switch the power supply off. It does this every time I try to power on; no beeps or anything. The POST will not show and I cannot get into the BIOS. I tried to clear the CMOS by unplugging all power sources, put the CMOS jumper on, removed the battery, and held the power button (which I tested to make sure it wasn't shorting). I let it sit for about 5 minutes, plugged everything back the way it was...same problem.

Following the advice of several forum threads, I tried removing the power and battery overnight, pressing Insert while powering on, and trying some new 1.8v RAM in every mem slot. Nothing has worked. It still auto restarts every 2-3 seconds without POSTing.

So, I'm asking: What sounds like the problem? Bad motherboard? RAM? CPU or PSU? Am I just retarded and not doing something? Any help would be much appreciated.
 
It sounds like your RAM got screwd or your BIOS. The auto reboot resets CPU settings, but not RAM. Clearing the CMOS should have fixed it, but since it didn't, you could either RMA your board or your RAM. You may want to try re-seating your CPU.
 
Back
Top