9600XT gets a new heatsink :D

Grizzy

Gawd
Joined
Sep 14, 2003
Messages
786
I had a stock AMD HSF on my video card for a while, but it wasn't on very securely so I took it off and put the stock back on... My friend recently got a Zalman HSF, and gave me his old one because I helped him install and gave him a few fan grills... So I decided to go ahead and throw that on my video card

I looked at it for a while, and I didn't want to have to remove fins for the bolts, so I didnt know how I was going to mount it, because bolts would definately mess up the fins

Then I looked at the screws that held the fan in, and they were THIN!! They ended up being the perfect size to go through the holes in my video card, so I measured out the holes and drilled just into the base of the heatsink and stopped with I got to the fins, dremeled off a good bit of the fan screws, and screwed it on

The heatsink ended up being the PERFECT size for my video card, the screws were the perfect size (once shortened up a bit) and it looks great - the fan is a bit loud, but I will be fixing that shortly

On to the pics! My camera was being stubborn about me holding it PERFECTLY still so the pics came out a bit blurred, I will take better pics later

card3.jpg

card2.jpg

card2b.jpg

card1.jpg


Edit: in case anyone is wondering what the white stuff on the RAM is for, I was experimenting with ramsinks, and havent finished getting them cut yet (made from a few of the heatsinks in this kit that I got from a friend)
 
Hey, nice HSF. How heavy is that HS? I have a similar larger hs sitting on my desk waiting specifically for my 9600xt, which already has ramsinks. I'm kinda worried about the weight of both of those on the actual PCB, don't want my card broken in half.

Already put one of these on, sometime gonna put the other on:
http://www.nmt.edu/~lbaker/vc2/1.jpg

Card with ramsinks (prolly the most interesting picture if you're just gonna look at one):
http://www.nmt.edu/~lbaker/vc2/5.jpg

In computer:
http://www.nmt.edu/~lbaker/vc2/6.jpg
 
That AMD stock heatsink on the left will be your best bet, and it won't hurt the card if those ramsinks havent already :p those are MASSIVE! And they look kinda stupid, they are so huge... I would trim the fins on them down to maybe half the size.... As long as you have decent airflow in your case you won't need anything half that big
 
I don't take actual temps on my video cards, but I touch the heatsink while/immediately after gaming and if its hot, then I upgrade :D

I was at a LAN party, playing Call of Duty and Far Cry for hours on end, and things got a bit warm for my liking :D

I just got done playing Call of Duty for a while, touched the heatsink, and its not even warm.... almost feels cold :p
 
Back
Top