8800GT incompatible with PCI-E1.0a slots?

KamelRed

[H]ard|Gawd
Joined
Aug 30, 2007
Messages
1,182
Not sure if this was brought up previously on this board so I thought I throw this out there. Apparently, the 8800GT does not like a few motherboards with older PCI-E 1.0a slots and will not boot up. There is a discussion going on over at the eVGA forums and I searched out a somewhat working solution if you have access to a computer that the 8800GT will boot on, you can flash the bios for backwards compatibility.

Whats [H]ard|Forum's take on this?
 
Not sure if this true since I am running EVGA's Superclocked Edition 8800 GT in a PCI-Express 1.x slot right now without so much as a hiccup. Maybe the slots on some boards are not supplying enough power or the users aren't plugging the cards into PCI-e power connectors?
 
Not sure if this true since I am running EVGA's Superclocked Edition 8800 GT in a PCI-Express 1.x slot right now without so much as a hiccup. Maybe the slots on some boards are not supplying enough power or the users aren't plugging the cards into PCI-e power connectors?

And to add on top of this

They probably have there craptastic 500 watt PSU that they paid 20 dollars for, trying to run the whole machine with a 8800gt on it
 
I saw some posts that some people got it working as well. My topic title is a little misleading as it is not all 1.0a slots but a few of them.
 
Wow cool, my MSi P6N-SLI Platinum is 1.1, whew. :)
Of course you can't find this info on the MSI website, but that thread on the eVGA forums links to a post on a Dutch site that lists the PCI-E versions by chipset.
 
I installed an 8800GT (Twintech brand) in a mate's Asus M2V (AM2 socket) resulted in some beeps and no post...tried other PSU's, ram,... switched to M2N-E mobo vidcard runs happy now...
 
[RIP]Zeus;1031657978 said:
And to add on top of this

They probably have there craptastic 500 watt PSU that they paid 20 dollars for, trying to run the whole machine with a 8800gt on it

Yeah, its funny that people trust these power supplies. I wouldnt even use it to test stuff. And it doesnt work good as a paper weight because its too light. :D
 
Back
Top