800D humming and vibration

rflcptr

Supreme [H]ardness
Joined
Mar 27, 2008
Messages
7,064
I've got my 800D on a desk with a wooden surface and steel frame. When the system is running, there is constant, noticeable humming. I think I've isolated the biggest source as being the hot-swap bays, where I have a WD 640 gig blue and a 1 TB black housed. Placing my hand on the steel portion of the windowed panel suppresses the humming considerably.

Buying SSDs is not a solution. :p

Would it be best to put sound-dampening material along the panel itself, or somehow work it around the bays? I'm also looking for a good way to help suppress the vibrations emitted through the case's feet. Thanks!
 
Last edited:
I had a similar problem with my 700d, except it was coming from the top panel. I used some nylon screws and rubber grommets to mount the top fans and that solved most of it.

It might also be how the side panels are held on. I hate Corsairs mounting system as the rails move and rattle. Maybe try putting some rubber or tape on the points that go inside the panel.
 
I got some polishing cloth temporarily wrapped around the ends of the rail on the windowed side, so far so good. The humming and vibration is much less now, so I'll pick up some actual dampening material to permanently patch these places.

Thanks again!
 
you are welcome
smile.gif

:p

Good to hear, rflcptr! This case is far too classy to be bogged down by rattles and hums.

Did your method bulge the panel out any? I should probably do it to mine.
 
I didn't pad the cloth against the panel, but rather against the roof of the case (rear end) and against the 5.25" cage (front end).

So yeah, no bulges! :p
 
Back
Top