7600gt ram coolers

MoDsOuRcEdOtNeT

Limp Gawd
Joined
Oct 31, 2003
Messages
469
I am wanted to watercool my 7600 gt, and I will be making a homemade waterblock.

The ram is spaced way apart from the VPU and with the stock heatsink its a huge (4"x2") heatsink with some fins with a fan blowing through them.

Is passive ramsinks good enough cooling for overclocked ram, and if so, would some epoxy and thermalpaste mixed together work for homemade ones?
 
Homemade waterblock??? When you're done, you need to share your accomplishment with the forum.... we need some pics!!!

Most waterblocks for videocards are just for the GPU, as this generates much more heat than the memory (kinda like why most "experts" think that heat spreaders on system RAM is pointless/useless). I think if you stick passive heatsinks on your videocard's ram, you should be fine, as long as you still have some airflow in your case. I've never used regular epoxy with AS, but have mixed AS adhesive (epoxy) with AS5 and had good results.

Good Luck
 
Alright thanks, I figured the ram gets pretty hot, but im not sure, Ill have to do some googleing, especially since ill be overclocking it. A bump for anyone that has done any geforce 7600 watercooling.
 
for sticking the ram sinks on use a 50/50 mix of thermal epoxy and Arctic Silver 5. This will weaken the epoxy so you can get them off if you need/want to but still give good thermal transfer. If I wanted to make it permanent I would put AS5 in the center with just the smallest amount of Superglue in 2 corners.
 
The RAM really does not need heatsinks at all on the 7600GT. If you notice the stock air cooler leaves most of them exposed anyway lol. That is why I am not that worried about getting the ArcticCooling HSF made for the 7800 series cards even though it doesn't line right up with the RAM on the card.
 
kill4killin said:
The RAM really does not need heatsinks at all on the 7600GT. If you notice the stock air cooler leaves most of them exposed anyway lol. That is why I am not that worried about getting the ArcticCooling HSF made for the 7800 series cards even though it doesn't line right up with the RAM on the card.

Exactly the answer I was looking for, thanks for the insight!
 
Alright, I put on a new heatsink that just covers the core, cools great, 10 degrees lower at idle and 20 degrees lower at load vs stock cooler.

The ram on the otherhand, at stock speeds in hot, and at overclocked, underload, speeds its burning 'ssssss' hot.

Back to my old radeon 9200 overclocking days, I know ram gets this hot and runs fine. But should I be worried about putting ramsinks on if I want this card to last a couple years?
 
MoDsOuRcEdOtNeT said:
The ram on the otherhand, at stock speeds in hot, and at overclocked, underload, speeds its burning 'ssssss' hot.

Back to my old radeon 9200 overclocking days, I know ram gets this hot and runs fine. But should I be worried about putting ramsinks on if I want this card to last a couple years?
The RAM on my 7600GT is quite hot under load as well and I've not seen any issues yet. I still haven't finished overclocking it yet either (not the time these days). I'm pretty sure I could get another 100mhz effective off the RAM mine has without adding heatsinks. And I'd rather not right now because of the warranty and all. If you use a 50/50 mixture of thermal epoxy/AS can you still clean it up "like new" later on if you have problems?
 
I have never really paid any attention to the RAM temps lol...maybe I should start...

However if its any consolation, I overclocked my card to 650/800 without any issues at all, the only time I start hitting problems is if I exceed 850 on the RAM and that may or may not be heat related.
 
kill4killin said:
I have never really paid any attention to the RAM temps lol...maybe I should start...

However if its any consolation, I overclocked my card to 650/800 without any issues at all, the only time I start hitting problems is if I exceed 850 on the RAM and that may or may not be heat related.
What memory does yours have? 1.4ns or lower?
 
Back
Top