680i stuck at 460 FSB

Z

Zinn

Guest
I just got this board in, and I'm not super familiar with all the tweaking options. I've tried a fair number of combinations including dropping the CPU multiplier and locking the DDR2 at 800mhz. All of the spread spectrum and special CPU features turned off.

The board just doesn't want to go past 460 FSB no matter how much voltage I feed it. Is there something I'm missing, or is this just as good as it gets?

On my last board (Gigabyte S3), I could take the CPU up to 480 and the RAM would go fine 1:1 4-4-4-12 along with it... Hmm...
 
You should be thankfull you achieved that speed most people cant even get to 400
 
Really? I read a bunch of reviews saying the 680i is the best thing since sliced cheese for high FSB speeds. Maybe everyone was kidding :confused:

Although IIRC techreport.com maxed out around the same speed.

Oh well, it's pretty fast. But if anyone knows any way to boost it up more, I'd be much obliged! :)
 
Mine also cannot post past 464 FSB. I unlinked the memory, and set the speed my self at 1000mhz. But no use :mad:
 
theres a couple of spots where it wont boot. i think between 420 and 430mhz, and between -450 and 470 or so. i could be mistaken about the exact spots. mine is running at 419x9 so its not an issue with me. these non booting spots are mentioned in the hardocp review, and several places in the long evga 680i problems thread. so i got to tell you, that thing about "most" people not getting over 400 is crap. i have never heard of anyone who didnt get over 400.
 
Pretty sure I've read about some crazy FSBs over in evga forums as well, like 1864 working.
 
Yeah 1864 is pretty close to where I'm stuck at! Remember this is a "QDR" (quad data rate) FSB, so 1864 / 4 = 466. Why the heck they don't just use the standard FSB speed before multiplication like every other motherboard on the planet, I do not know, but yeah. 1864 is about 5 *real* megahertz on the FSB away from where I'm stable at...

I now believe that NVIDIA / EVGA sent unrealistically good samples out to reviewers in order to dupe early adopters such as myself. I find that pretty disappointing, although I'm otherwise very satisfied with the board. It is more stable and less glitchy than my Gigabyte S3 was even if it doesn't clock as high. Plus it has some pretty nifty features.

But was it worth $250 for less overclocking potential than a $90 board? :mad:
 
Yeah, that's a no go. I've tried 5mhz FSB increments up to 510 FSB.

I can boot at 465 but the system is totally unstable under any voltage so I have to back it down.
 
Yea a hole in our pocket :D
heh. seriously. :rolleyes: :(
at least I haven't run into the issues others have run into. otherwise this would be back on its way to Newegg...

yes. you can probably find a definitive list of spots where it wont boot over at the evga community. they call them "holes"
can you point me to a thread? i have been looking on their forums for something like this and have been so far unsuccessful. thanks :)
 
I bought my board from newegg as well but i read that we can't return them for a refund just a replacement. If that isn't the case let me know.
 
the usual for motherboards is 30days or less and you can get a refund minus 15% restocking. if your board has a problem, and its registered, evga will advance ship you a new retail sealed box, overnight, for $16, and include free shipping back for the bad board. a lot better than handing newegg $40 or so for letting you use a defective board for a few weeks. both my evga's have been perfect in every way. more than makes up for the evga nforce 4 boards.
i will look around for those threads about the fsb holes and post some links.
 
Back
Top