• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

6800 Ultra/Shuttle Question

H

HaVoC

Limp Gawd
Joined
Nov 29, 2003
Messages
275
Was looking at some of the other threads about modding your shuttle to fit a 6800 Ultra and was wondering if I just leave the case side/top off and cut the extra pci slot off would it fit?

Thanks
 
ist the AGP/PCI-E 16x slot right on the edge of the Shuttle leaving the cooler facing right at the side of the case? you wont even have to cut the other PCI slot.
 
Forsakenzoul said:
ist the AGP/PCI-E 16x slot right on the edge of the Shuttle leaving the cooler facing right at the side of the case? you wont even have to cut the other PCI slot.
Click to expand...


Pictures of the SN95G5V3 on newegg show the AGP on the left side?
 
You have two options:

1) Cut the side of the case to fit the card.

2) leave cover off.


Both will work, but IMO cutting a slot in the side of the case that will fit the cooler would be the neatest choice.

Or You can just buy a sinlge slot GT and overclock that bad boy :)
 
-=MrStalinsOpus=- said:
You have two options:

1) Cut the side of the case to fit the card.

2) leave cover off.


Both will work, but IMO cutting a slot in the side of the case that will fit the cooler would be the neatest choice.

Or You can just buy a sinlge slot GT and overclock that bad boy :)
Click to expand...

Already got an Ultra :\
 
sff2tq.jpg


If im not mistaking thats leaves the Cooler pointing out. Ill find a pic of it open witha Vidcard on if i can. Im sure it does leave it with the cooler facing the outside so leaving it open or cutting the case should work :)
 
:( Didn't notice you already had the ultra.....But the good news is that cutting a shuttle is easy business. I've seen pictures on this forum of somebody who did a very neat clean cut around the heatsink...........
 
If you check around you might even be able to find a one slot aftermarket cooler for it. I'm not sure if these exist off the top of my head, but I wouldn't doubt it. You could even flash to a 1.4V BIOS that the GTs run on to lower heat output.
 
You must log in or register to reply here.
Back
Top